nimblemotors
Silver Member
- Joined
- Sep 14, 2011
- Messages
- 104
- Location
- Sacramento, California
- Tractor
- Case 530 CK Sold, Ford Ranger DIY Project
I have no power in my power steering. I can barely get the wheels to move when its not moving. It has been sitting for a while, and I'm not sure it ever worked when I moved it last time.
The resevoir was pretty empty when I checked it today, and a bit milky, so I put in more fluid, same story, still milky a bit, this time I disconnected a hose and drained it, cranked motor, and it pumps out. Put in new fluid and still no workie. The pump is working, there are no leaks, so the only thing I suppose is the power cylinder.
What might someone suggest is my next step? Take the cylinder off and take it apart?? I'm thinking parts to fix it will not be available?
Appreciate any input.
Jack
The resevoir was pretty empty when I checked it today, and a bit milky, so I put in more fluid, same story, still milky a bit, this time I disconnected a hose and drained it, cranked motor, and it pumps out. Put in new fluid and still no workie. The pump is working, there are no leaks, so the only thing I suppose is the power cylinder.
What might someone suggest is my next step? Take the cylinder off and take it apart?? I'm thinking parts to fix it will not be available?
Appreciate any input.
Jack