Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    May 2012
    Posts
    7
    Location
    worcester UK
    Tractor
    massey 3095 case 4210 massey ferguson 3070

    Default case 4210 splitting problem

    Hi, I have got a cas 4210 with cab, can any one tell me how to split back axle from gearbox I seem to remember you have to take the pto shaft out and drop pto clutch thanks.

  2. #2
    Platinum Member
    Join Date
    Apr 2011
    Posts
    739
    Tractor
    cx70,5510,4630,5005

    Default Re: case 4210 splitting problem

    what are you trying to do? to take a axle out,put a jack under the rear end take the tire off.then take a engine lift hook it to the axle and unbolt it.

  3. #3
    New Member
    Join Date
    May 2012
    Posts
    7
    Location
    worcester UK
    Tractor
    massey 3095 case 4210 massey ferguson 3070

    Default Re: case 4210 splitting problem

    Hi, I am trying to remove the gearbox because cogs in there are damaged, by back axle I mean where it bolts to the whole thing in the middle , the gear box is also bolted at bell houseing end where I have not yet un bolted . At the rear of the gearbox it only seems to want to seperate by about half an inch I guess the pto shaft or something has say a pin that has to be removed to allow gear box to be taken out thanks.

  4. #4
    Platinum Member
    Join Date
    Apr 2011
    Posts
    739
    Tractor
    cx70,5510,4630,5005

    Default Re: case 4210 splitting problem

    get a stand ,with wheels,and attach it to the front.unbolt it at the bell housing.then roll it apart.be sure and block the rear end up.you should then be able to get it apart.

Similar Threads

  1. case 4210 auxilary hydraulics failure
    By robbb in forum Hydraulics
    Replies: 3
    Last Post: 05-17-2012, 12:25 PM
  2. Problem Splitting Fiat 50-86
    By Localmotion in forum New Holland Owning/Operating
    Replies: 0
    Last Post: 04-11-2011, 11:26 AM
  3. Clutch lifespan .....Case 4210
    By caseyvand in forum Case-IH
    Replies: 0
    Last Post: 04-02-2011, 10:53 PM
  4. Buying Advice Case IH 4210
    By ah64_ip29 in forum Case-IH
    Replies: 0
    Last Post: 08-16-2010, 12:51 PM
  5. Would anyone be interested in splitting a case of TRC Moly 880 C&C?
    By Snatchface in forum Oil, Fuel & Lubricants
    Replies: 19
    Last Post: 05-01-2009, 10:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.