Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    New Member
    Join Date
    Oct 2012
    Posts
    4
    Location
    Hiram, Georgia
    Tractor
    International 574

    Default Brakes on International 574

    Have a International 574; can't seem to get any brake pressure; have tried bleeding; no luck; any suggestions....Joeander

  2. #2
    Veteran Member
    Join Date
    Jan 2009
    Posts
    2,184
    Location
    Carroll, Ohio
    Tractor
    Massey 180 Diesel

    Default Re: Brakes on International 574

    Is on both, or just one..?? Below is an exploded view of your brakes. Click on it, and it will enlarge. If it is just one of them, might be either #24 or #29, depending on which wheel. These are orifices, and screens. Maybe contaminated, and plugged..?? And if just one, maybe the master cylinder..?? Each wheel has one, #5, I believe.

    Or if both, #25 is the equalizer for both brakes.

    Don't have one, or never worked on one, just trying to see where trouble spots may be in the brake system, from this exploded view.

    -574-brakes-gif

  3. #3
    Super Member
    Join Date
    Jul 2011
    Posts
    6,541
    Location
    Central wisconsin
    Tractor
    International 2500a with Loader

    Default Re: Brakes on International 574

    how are you bleeding them?there is a procedure.

  4. #4
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: Brakes on International 574

    Sorry to hear you have brake problems, a fairly common issue on these machines!!
    I have attached a document which should help you solve the problem??, any further questions come back to us on the forum
    Attached Files Attached Files

  5. #5
    New Member
    Join Date
    Oct 2012
    Posts
    4
    Location
    Hiram, Georgia
    Tractor
    International 574

    Default Re: Brakes on International 574

    cyrus; thanks for data; on page 2 you mentioned "warm transmission oil", auto or tractor? On page 6 bleeding procedure; you mentional dump hose; where and what is dump hose/

    tHANKS AGAIN
    JOEANDER

  6. #6
    New Member
    Join Date
    Oct 2012
    Posts
    4
    Location
    Hiram, Georgia
    Tractor
    International 574

    Default Re: Brakes on International 574

    cyrus; thanks for data; on page 2 you mentioned "warm transmission oil", auto or tractor? On page 6 bleeding procedure; you mentional dump hose; where and what is dump hose/

    tHANKS AGAIN
    JOEANDER

  7. #7
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: Brakes on International 574

    Warming transmission oil, refers to using warm oil to top up the plastic hoses used on the seal leakage test. Pouring warm oil into tubes will allow air in oil to rise quickly to the top of the tubes so you get aset level, (saves time!!).

    Dump hose, sorry !! Confusion of terms, this is the return hose that goes from top of spaghetti pipe to top of gearbox as shown in diagram!!

  8. #8
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: Brakes on International 574

    some additional information to help !!
    Attached Thumbnails Attached Thumbnails -74-85-85-series-brake  

  9. #9
    New Member
    Join Date
    Jul 2014
    Posts
    2
    Location
    silsand
    Tractor
    ih574, mf675

    Default Re: Brakes on International 574

    have a problem with my brakes also, have changed the o ring in the pistons on both sides in the back. before this only right side could work for some hours when bleed. No I dont get any pressure on either of the pedals, have tried everything in the pdf listes above, with no result. have tried the clear plastic hose with oil where the break pipes go onto the axel, stood all day and night, was not emty..tried to blow with my breath into the same hose, feels like it is no leak.

    so what can be the problem on this tractor then?

  10. #10
    Super Member
    Join Date
    Jul 2011
    Posts
    6,541
    Location
    Central wisconsin
    Tractor
    International 2500a with Loader

    Default Re: Brakes on International 574

    I am having the same problem right now.I bled the brakes with both pedals locked did not try separately so i will try that.
    ::welcome :::RON
    never stop learning.

Page 1 of 2 12 LastLast

Similar Threads

  1. Brakes on a 574 international tractor
    By Stanley75 in forum Case-IH
    Replies: 17
    Last Post: 10-16-2014, 07:22 PM
  2. international 574 brakes
    By joeander in forum Hydraulics
    Replies: 0
    Last Post: 10-15-2012, 06:31 PM
  3. international 574
    By tbpo in forum Hydraulics
    Replies: 2
    Last Post: 04-09-2012, 04:00 PM
  4. ROPS for International 574
    By Billbob in forum Customization
    Replies: 8
    Last Post: 10-16-2011, 09:44 AM
  5. International 574
    By Scott A in forum New Member Introductions
    Replies: 9
    Last Post: 12-15-2010, 06:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.