Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Oct 2012
    Posts
    1
    Location
    Chatham il
    Tractor
    international 1086

    Default 1086 problem

    need some advise i purchased a 1086 that has not been ran in over 6 years checked fluids and oil was full but had no hydralic fluid on dip stick i added 10gal of hytran cranked machine over and started up after 5 second of cranking put machine in reverse and tractor moved put tractor back in neutral let off clutch. put tractor back in reverse and would not move i have no steering and can hear a whining noise from the fill tube for the hydralic fluid any help would be appreciated thanks in advance.

  2. #2
    Gold Member pedalstomper78's Avatar
    Join Date
    Aug 2010
    Posts
    449
    Location
    Ohio
    Tractor
    Case/IH DX33

    Default Re: 1086 problem

    Did you re-check the hydraulic fluid then? If things were pretty dry, running the engine "re-filled" the areas that would typically have oil in them just after running also. I would check the oil again and I'm willing to bet you'll have to add a few more gallons.

Similar Threads

  1. IH 1086 - Running Away / free wheeling / brakes problem
    By strongstockfarm in forum Parts/Repairs
    Replies: 2
    Last Post: 08-06-2012, 05:25 PM
  2. Grading 1086 tractor
    By Missouri in forum Case-IH
    Replies: 6
    Last Post: 03-11-2011, 07:24 AM
  3. 1086 International
    By unreconstructed in forum Ag Tractors & Machinery
    Replies: 5
    Last Post: 12-29-2005, 09:16 AM
  4. IH 1086
    By Anonymous Poster in forum Case-IH
    Replies: 1
    Last Post: 01-09-2003, 09:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.