Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18
  1. #11
    Platinum Member
    Join Date
    Feb 2013
    Posts
    645
    Location
    Thornville, Ohio
    Tractor
    No longer Searching. Mahindra 3016 Shuttle

    Default Re: 444 pto And hydraulic issue

    The one broken bolt put the clutch disc/pressure plate out of adjustment despite what the pedal adjustment was telling me. So in therory, yes, one broken/loose bolt could cause the symptoms you are seeing.

    I was just glad there was nothing in front of me when I went to stop. It took me a split second to realize nothing was happening before I stomped on clutch pedal.

  2. #12
    Platinum Member
    Join Date
    Feb 2013
    Posts
    645
    Location
    Thornville, Ohio
    Tractor
    No longer Searching. Mahindra 3016 Shuttle

    Default Re: 444 pto And hydraulic issue

    What have you found?

  3. #13
    New Member
    Join Date
    Jun 2013
    Posts
    11
    Location
    Marion, tx
    Tractor
    international 444

    Default Re: 444 pto And hydraulic issue

    Quote Originally Posted by wolftree View Post
    What have you found?
    I have been so busy with work and putting a roof on my house I have not had a chance 2 look as tractor. However I am still having problem with hydraulics. I think I'll have to go into the control though. Anxiously awaiting the opportunity to look at the clutch. Might take me a week or two.

  4. #14
    Platinum Member
    Join Date
    Feb 2013
    Posts
    645
    Location
    Thornville, Ohio
    Tractor
    No longer Searching. Mahindra 3016 Shuttle

    Default Re: 444 pto And hydraulic issue

    I understand, a roof is priority.

    I had an exploded view "parts with part number" manual when I had my 444. It was often as usefull as the operators manual for working on it.

    If you do not have this, your Case-IH dealer should be able to get you one.

  5. #15
    New Member
    Join Date
    Jun 2013
    Posts
    11
    Location
    Marion, tx
    Tractor
    international 444

    Default Re: 444 pto And hydraulic issue

    I bought a "knock off " repair manual" at the dealer for like 20 or 30 bucks. They also had another from IH-Case that he said would be in the 100's . The one I bought is OK to get me through. Hopefully my past mechanic's expertise will get me through, we shall soon see

  6. #16
    New Member
    Join Date
    Jun 2013
    Posts
    11
    Location
    Marion, tx
    Tractor
    international 444

    Default Re: 444 pto And hydraulic issue

    Update: I hate when there is never a solution posted on these threads cause we all look for them to get answers so......
    I replaced hyd pump and valve body along with cleaning and refilling system. Works great !!! Now the clutch I'm finally getting into cause a tractor with no PTO sucks !! Lol more to come. I have clutch plate dropped and we will know more soon and I will share it with everyone.

  7. #17
    Gold Member
    Join Date
    May 2014
    Posts
    464
    Location
    Paarl South Africa

    Default Re: 444 pto And hydraulic issue

    Three stages ......1......freetravel......2........Transmition, ,,,,,,,3.......PTO
    Freetravel very importend for the life of your clutch !

  8. #18
    Gold Member
    Join Date
    May 2014
    Posts
    464
    Location
    Paarl South Africa

    Default Re: 444 pto And hydraulic issue

    PTO.....the coupler and rear shaft splines eaten away? ........select pto to engage posision ........drain differential oil .....remove pto sealhousing and pull pto shaft out and ...inspect........I think to remove coupler you need to remove the 3pointhidge(rockshaftcover) and inspect the inner splines ! replace if needed !

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Replies: 7
    Last Post: 06-25-2015, 01:19 PM
  2. 1962 JD 3010 gas w/ loader - issue with the PTO drive...
    By allwet in forum John Deere Owning/Operating
    Replies: 6
    Last Post: 06-27-2013, 08:17 AM
  3. LA140 w/intermittent PTO, melted PTO Clutch Switch and blown 20A fuse
    By Juan Deere in forum John Deere Lawn & Garden
    Replies: 8
    Last Post: 06-26-2013, 04:23 PM
  4. KAMA PTO selector issue
    By Paddy in forum Chinese Tractors
    Replies: 11
    Last Post: 05-07-2013, 09:49 AM
  5. MF1240 PTO ISSUE
    By DONALDK in forum Parts/Repairs
    Replies: 0
    Last Post: 04-25-2013, 07:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.