Results 1 to 2 of 2
  1. #1

    Join Date
    Mar 2004

    Default How to add oil to 400 Farmall

    Hi, i'am new to restoring Tractors.I'am having problems getting oil in my tractor,there is a small fitting on the rear of the valve cover,but the hole in it is so small it will take a funnel with a very small end to get the oil in it.The second problem i can't get the fitting out of the valve cover.Does anyone have any suggestions or has anyone run in to this problem? The Tractor is a 400 Farmall.

  2. #2
    Super Member ronjhall's Avatar
    Join Date
    Apr 2000
    SE Michigan
    Kubota 2910 HST

    Default Re: How to add oil to 400 Farmall


    Welcome to TBN. [img]/forums/images/graemlins/smile.gif[/img]

    I had a Farmall 340 and have used several other models over the years. There is usually a 3" vent cap on the side of the engine block. The vent may be rusted onto the tube that is in the block.

    Hope this helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.