Results 1 to 2 of 2
  1. #1

    Default pto lever on IH 560 broken

    Hi, The PTO lever, which hooks onto the shaft which goes into the rear end of the tractor, has broken. It is a very poor design, and not made new anymore. Is my only option a bone-yard, or is there somewhere I can get a custom made one which would be sturdier. The problem with the design is the slot for the half-moon key leaves a very thin area on the on the lever.

  2. #2

    Join Date
    Jul 2000
    East Tennessee / South Central Oregon
    None (at present)

    Default Re: pto lever on IH 560 broken

    Konkedh, if you can remove the lever, I would recommend a good machine can be repaired and reinforced to be stronger than before. Cost shouldn't be prohibitive, and the end job would be stronger than a replacement part from the boneyard....just an observation.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2014 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.