Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Jul 2012
    Caroline, AB, Canada
    Case 446

    Default Case 446 Clutch Adjustment

    I have an old 446 that I am restoring. We have the Onan engine working well now, just need mufflers, so if you have a set in good condition, please give me a call.
    We are having trouble with the clutch adjustments. We took it apart and removed all of the rust (it had sat for a long time) and put everything back the way the parts manual says but there seems to be too much space between the C clamp and the flywheel for one thing and when you put the clutch in gear the engaging arm comes back to where it rubs on the flywheel. Does anyone have any ideas? The clutch lever linkage to the engaging arm appears to be in order. We have taken it apart and replaced the parts, following the parts diagram several times and are confident that they are all in the right places. Any help would be appreciated.

  2. #2
    Silver Member
    Join Date
    Jul 2010

    Default Re: Case 446 Clutch Adjustment

    Send me a PM so I can connect you with the Service Manual for the clutch.

Similar Threads

  1. case 446
    By lincolntc in forum Parts/Repairs
    Replies: 8
    Last Post: 06-01-2013, 02:06 PM
  2. Case 446 Clutch Adjustment
    By TetzE in forum Parts/Repairs
    Replies: 1
    Last Post: 07-02-2012, 10:27 PM
  3. Case 446
    By Buschlight in forum Case / Ingersoll
    Replies: 7
    Last Post: 07-02-2012, 01:23 PM
  4. case 446
    By gertlincoln in forum Case / Ingersoll
    Replies: 5
    Last Post: 03-28-2012, 10:43 PM
  5. Case 446
    By spoover in forum Parts/Repairs
    Replies: 1
    Last Post: 11-01-2011, 04:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.