Results 1 to 2 of 2
03-11-2013, 04:30 PM #1
446 Snowblower parts
I've got a 446 with the 48" front mount single stage blower and have managed to strip the teeth off the big sprocket on the auger. It appears that this is all one piece (I honestly didn't look closely yet...I was out of patients at the time) but I'm wondering if anyone has had any success repairing/replacing that gear.
03-11-2013, 11:26 PM #2
- Join Date
- Jul 2010
Re: 446 Snowblower parts
It is possible to cut the welds that secure the gear in place and then weld an aftermarket gear in place. Any business that sells bearings and other power transmission products will stock a gear that accepts #40 chain with the same amount of teeth. There is no OEM part number for the gear itself, only for the auger with the gear already welded on. Therefore, contacting an Ingersoll dealer would be pointless. Parry Sound should certainly be large enough for you to find a supplier. Check your local Yellow Pages under Bearings or Power Transmission Products.
By farmall40 in forum Case / IngersollReplies: 2Last Post: 07-07-2011, 05:12 PM
By aakloos32 in forum Parts/RepairsReplies: 4Last Post: 01-31-2011, 05:01 PM
By Lennox64 in forum Parts/RepairsReplies: 2Last Post: 06-17-2010, 04:48 PM
By acs55812 in forum John Deere Owning/OperatingReplies: 6Last Post: 05-07-2010, 10:48 AM
By agford4x4 in forum Case-IHReplies: 1Last Post: 06-17-2007, 12:28 AM