PAT1
New member
- Joined
- Feb 23, 2014
- Messages
- 18
- Location
- LOUDON TN
- Tractor
- Ford 1500, Shibaura,Case, Gravely,Snappin` Turtle
I picked up 2 Case GTs in an auction recently....a 76` 446 and `72 444 Demonstrator. I got the 446 going with a points clean and started right up but appears to have carb issues. Mows like it should but seems to be connected to the lift wrong.
There was no key with the Demon and has been used pretty good but seems to be complete with the lift cylinder on 3 Pt in place but missing some hardware there. I would like to save the keyless switch to use for restore maybe but may get a replacement switch to use for now. What would be the chance a of finding a key to fit. It is a long key...not the short standard lawnmower switch.. Doubt that there were to many different keys for the Culver-Stearns switch.
Condition unknown on how its runs yet. Will try to gets some pics up soon.
There was no key with the Demon and has been used pretty good but seems to be complete with the lift cylinder on 3 Pt in place but missing some hardware there. I would like to save the keyless switch to use for restore maybe but may get a replacement switch to use for now. What would be the chance a of finding a key to fit. It is a long key...not the short standard lawnmower switch.. Doubt that there were to many different keys for the Culver-Stearns switch.
Condition unknown on how its runs yet. Will try to gets some pics up soon.