Branson 2910i

   / Branson 2910i #1  

DeeDubya

Silver Member
Joined
May 9, 2011
Messages
214
Location
San Marcos, TX
Tractor
Branson 2910i
Anyone here own a 2910i or 3110? I have a couple questions, small problems you might have encountered.
 
   / Branson 2910i #2  
Hey DeeDubya- just ask the question.... There are plenty of knowledgable and talented people on this forum.
 
   / Branson 2910i
  • Thread Starter
#3  
I pitched one of my questions over on hydraulics (about leaking q-couples on the control valve) and JJ helped me out. I think I will order all 4 and replace them.

Another question was on tires. I recently replaced the 2 fronts which were ag type Carlysle 7x16-6 R1. I'm shredding the tread on this hill country rock and was wondering if they can be replaced with industrial tread on the same rim? The industrials look to be wider and might require a wider rim. Also, the wheel height might then be different and cause some torqueing when in 4w drive.
 
   / Branson 2910i #4  
Industrial tires do require different wheels. I believe Branson recommends keeping the same type of tire on all 4 wheels because of radius differences and 4-wheel gear timing.
 
 
Top