sagebrushbilly
New member
Does anyone have suggestions on the tractor splitting process for the 3045? This one is a bit different than the older domestic tractors we have had around here before. I am aware that I will be needing to move the rear half out on a floor jack, but not sure just what needs to be disconnected where.... Looking for anyone who has done it before.
Since the specs say this model has a single dry clutch disk, and it is also described as a two stage clutch,[traction half way down, pto clutch all the way down], I would appreciate any tech info on how this actually works internally. Some older tractors with two stage clutches have a double clutch or a two disk clutch. Any help out there on that ?
Since the specs say this model has a single dry clutch disk, and it is also described as a two stage clutch,[traction half way down, pto clutch all the way down], I would appreciate any tech info on how this actually works internally. Some older tractors with two stage clutches have a double clutch or a two disk clutch. Any help out there on that ?