Results 1 to 10 of 10
  1. #1
    New Member
    Join Date
    Feb 2013
    Posts
    4
    Location
    hanceville alabama
    Tractor
    branson 4220

    Default branson 4220 glow

    hi my name is randy i have a branson 4220 tractor with glow plug probs

  2. #2
    Silver Member
    Join Date
    Jul 2012
    Posts
    160
    Location
    St.Albans,Maine
    Tractor
    TYM T451,bolens G214.John Deere 440CID,Shaver sc25 stunpbuster,woods750 backhoe,wallenstien splitter,woods bb60 mower,woods 60"tiller,countryline tiller,99 international 4700 car carrier

    Default Re: branson 4220 glow

    We need a little more info........Welome to TBN

  3. #3
    New Member
    Join Date
    Feb 2013
    Posts
    4
    Location
    hanceville alabama
    Tractor
    branson 4220

    Default Re: branson 4220 glow

    i have a branson 4220 tractor that i need glow plugs for a after market ngk or other brands will do the plug is a 10mmx1.25 thread 11v

  4. #4
    New Member
    Join Date
    Feb 2013
    Posts
    4
    Location
    hanceville alabama
    Tractor
    branson 4220

    Default Re: branson 4220 glow

    the glow plugs are 10mmx1.25 11v

  5. #5
    Silver Member
    Join Date
    Jul 2012
    Posts
    160
    Location
    St.Albans,Maine
    Tractor
    TYM T451,bolens G214.John Deere 440CID,Shaver sc25 stunpbuster,woods750 backhoe,wallenstien splitter,woods bb60 mower,woods 60"tiller,countryline tiller,99 international 4700 car carrier

    Default Re: branson 4220 glow

    I found the plugs the part # is NGK y112ts

  6. #6
    New Member
    Join Date
    Feb 2013
    Posts
    4
    Location
    hanceville alabama
    Tractor
    branson 4220

    Default Re: branson 4220 glow

    thanks .

  7. #7
    Epic Contributor murphy1244's Avatar
    Join Date
    Nov 2011
    Posts
    20,593
    Location
    Ohio
    Tractor
    Kioti DK-40, MF-135, Ventrac 4500Y

    Default Re: branson 4220 glow


  8. #8
    Elite Member The kid's Avatar
    Join Date
    Apr 2012
    Posts
    4,166
    Location
    Middle Tennessee
    Tractor
    1965 135 gasser, 1967 135 diesel

    Default

    Greetings Randy and welcome to TBN.

    Sent from my iPad iOS 6.1 - TBN v1.6

  9. #9
    Elite Member Briana03's Avatar
    Join Date
    Jul 2010
    Posts
    3,292
    Location
    San Diego, California
    Tractor
    None

    Default Re: branson 4220 glow

    Welcome to TBN

    I moved your thread to the Zetor, Century, & Branson forum.
    Briana
    TBN Support

  10. #10
    Elite Member
    Join Date
    Nov 2005
    Posts
    3,129

    Default Re: branson 4220 glow

    I just got a set of replacement plugs.
    I had suspected bad glow plugs on my 2005 Century C42 about 8 years ago.
    I removed them, checked them with a meter and while I don't recall the measured resistance I remember that they were reasonably close to each other.
    Before reassembly I cleaned everything up, including some paint on the buss bar that takes power to them.
    All was well after that, however this winter the tractor was very difficult to start if I didn't run the block heater for an hour or two.

    Last week (sunny break) I pulled the plugs again, three were open circuit the fourth measured 38 ohms.
    Markings A36J 11V.

    Various cross references pointed to Cummins 4900224, but searches for those led to prices all over $40, my Branson/Century dealer had already quoted me $43.xx.

    Eventually found "over the hill tractors" on flea bay and ordered a 4 plug set for $79.99 plus $4 shipping.
    They arrived today, each one measures about 1.1 Ohm, so the set is going to draw something close to 50 amps, OK.

    The manufacturer (or at least the "packager") seems to be Sparex.
    The boxes indicate that their pat # is S.69256 and they fit Branson:
    2910 2910l 3510 3510H 3510l 3820 4020 4020l 4020R 4220 4520C 4720H 4720l 4720R 5220l 5220R 5520C 5530R (hopefully no typos and those are lower case letter "l")
    replaces HK15170000A4

    Minor detail differences in the appearance is that the neck just above the threads has a bevel, which doesn't matter since the original plugs don't screw in that far. Also there is a slightly longer terminal screw on the replacement plugs, maybe 4 mm longer (or a little over 1/8 inch).

    Waiting for the FREEZING rain to stop...

Similar Threads

  1. Branson 4220 Glow Plugs
    By walker45 in forum Century & Branson
    Replies: 5
    Last Post: 03-06-2013, 02:19 PM
  2. New Branson 4220 Owner
    By Firehouse1302 in forum Century & Branson
    Replies: 6
    Last Post: 10-10-2012, 12:36 PM
  3. Branson 4220
    By walker45 in forum Century & Branson
    Replies: 3
    Last Post: 07-01-2012, 10:05 PM
  4. Price Check Pricing on 4220 Branson
    By trs in forum Century & Branson
    Replies: 6
    Last Post: 05-05-2005, 05:09 PM
  5. Branson 4220 - strongly considering one.
    By Tornado in forum Century & Branson
    Replies: 19
    Last Post: 05-31-2004, 01:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2018 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.