Results 1 to 3 of 3
  1. #1

    Default Century 2535 - Shuttle Shift slipping

    I have a Century 2535 with the Forward/Reverse shuttle shift slipping. Once in place, it stays but even on full clutch, it does not fully engage going into Forward and Reverse and grinds when releasing the clutch. I have adjusted the play out of the clutch pedal but that did not solve it. I did notice that the u-joint knuckle down from the shift lever has some play in it. Anyone else having this problem? Any ideas on what I can do? What to look for?

    Thanks

  2. #2

    Default Re: Century 2535 - Shuttle Shift slipping

    Anyone? Any Branson's out there that have the comparable model?

  3. #3
    Veteran Member
    Join Date
    May 2005
    Posts
    1,418
    Location
    N. E. Florida

    Default Re: Century 2535 - Shuttle Shift slipping

    I had to slam my 3510 Branson to get it into reverse and finally figured out that the linkage is adjustable where the top and bottom rods go together on the coloum.
    Is your problem both F and R or just one?

Similar Threads

  1. Century 2535
    By greason in forum Parts/Repairs
    Replies: 6
    Last Post: 09-05-2012, 06:44 PM
  2. Shuttle shift grinds on Century 2035
    By machinehead in forum Century & Branson
    Replies: 2
    Last Post: 07-08-2005, 01:33 AM
  3. Century 2028 shuttle shift lever is tight....
    By gambler in forum Century & Branson
    Replies: 2
    Last Post: 05-24-2005, 07:46 PM
  4. Century 3035 Shuttle Shift Linkage
    By DigDug in forum Century & Branson
    Replies: 5
    Last Post: 12-13-2004, 08:49 PM
  5. Century 2535
    By splitrail in forum Century & Branson
    Replies: 15
    Last Post: 04-02-2004, 08:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.