Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Apr 2006
    Posts
    11
    Location
    S.E. Michigan

    Default Branson 3510 Engine oil filter

    Anyone know the part number for the engine oil filter for a Branson 3510? Last year my dealer sold me a YN148 which was identical to the one that originall came with the tractor. This year they sold be a blue colored filter that had the word HYDRAULIC on the box part number HH11050000A3.

    Dealer assured me it was the correct one but the second day after the oil change the filter had a massive leak from the seal.

  2. #2
    Member
    Join Date
    Aug 2005
    Posts
    43
    Location
    Central Texas
    Tractor
    Century C42L

    Default Re: Branson 3510 Engine oil filter

    The HH11050000A3 is the correct filter for your 3510, according to my owners manual anyway. Make sure that your old seal came off the engine when you changed your filter, it could be as simple as having 2 seals between the engine/filter instead of just one. H.

  3. #3
    Elite Member
    Join Date
    Sep 2002
    Posts
    3,177
    Location
    Red Bluff, CA
    Tractor
    Changes often!

    Default Re: Branson 3510 Engine oil filter

    B179 Baldwin, or equivalent Wix or Napa is fine.

  4. #4
    New Member
    Join Date
    Apr 2006
    Posts
    11
    Location
    S.E. Michigan

    Default Re: Branson 3510 Engine oil filter

    Thanks, I'm sure there was only one seal on it when I did the oil change (the old seal is still in the old filter).

    I'll install a new filter just to be sure. Don't want to have to replace the motor!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.