husky 350

   / husky 350 #1  

npfitz

New member
Joined
Dec 1, 2011
Messages
3
to upgrade to a pro-saw? if so does air filter need to change or would be worth
doing. if so what needs be replaced
 
   / husky 350 #5  
Not sure what you are asking:confused2: Could you be more specific???

Are you trying to make your 350 a "pro" saw by just chainging air-filters???? Not going to happen if that is what you are asking,
 
   / husky 350 #6  
350 is a plastic saw with bolt on 52cc cylinder. I pass on them like new for $100 to $175 all the time.
Decent home owner saw.

You can bolt on a 346xp 50cc topend on a 350 and have a plastic crankcased 346 power. You can also bolt on a 357 carb on one too. Did it one day for chits and giggles.
 
   / husky 350 #7  
350 is a plastic saw with bolt on 52cc cylinder. I pass on them like new for $100 to $175 all the time.
Decent home owner saw.

You can bolt on a 346xp 50cc topend on a 350 and have a plastic crankcased 346 power. You can also bolt on a 357 carb on one too. Did it one day for chits and giggles.


Let me get this straight.

If you have a husky 359, swap top end to 346xp and use 357 carb, it will make the 350 a decent pro saw ? :confused2:
 
   / husky 350 #8  
Let me get this straight.

If you have a husky 359, swap top end to 346xp and use 357 carb, it will make the 350 a decent pro saw ? :confused2:

Totally wrong :laughing::confused2::confused:
 
   / husky 350 #9  
i would buy every huqvarna 350 in like new condition you can find in the $100 dollar range. used and abused on ebay in the $250 plus range. these were a great saw. the new models are rebadged poulans called ranchers. the 350 was and still is a great saw. i also have a 346 xp.
 
   / husky 350 #10  
i would buy every huqvarna 350 in like new condition you can find in the $100 dollar range. used and abused on ebay in the $250 plus range. these were a great saw. the new models are rebadged poulans called ranchers. the 350 was and still is a great saw. i also have a 346 xp.

The 450 clamshell saw is the replacement of the 350 is not a poulan saw. :confused2:

The 455 plastic saw clamshell type replaced the 55 rancher.

None of them were Poulans.

Only the smaller husky 235 is a rebaged poulan now days that I have seen and in the past it was husky 36 41 136 141.

On the 350 52cc plastic saw I ran the other day to compare to a 50cc 346, no comparison. 350 would make a great homeowner saw if you can keep the muffler on them tight and keep from melting a hole through the plastic crankcase oil tank. Send me the $$$ and I will start picking them up for you for cost of gas and shipping.

So please do tell me all these new models that are rebadged poulans and called ranchers.
 
 
Top