Results 1 to 9 of 9
-
09-10-2012, 09:57 AM #1
- Join Date
- Jan 2009
- Posts
- 9,135
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
I could'nt believe it - 088 for $450
I meant couldn't
CL ad:
STIHL 088 (~1998) + 36" bar + Alaskan Sawmill - $450 (Oakton, Va)
Date: 2012-09-08, 4:56PM EDT
Reply to this post 6x6qr-3259136490@sale.craigslist.org [Errors when replying to ads?]
This is a STIHL 088 chainsaw (8.9 HP!, cost $1200 new), runs great. I used it for milling logs into boards (not professional load, but heavy usage when used) using an Alaskan Sawmill (an attachment that clamps on the bar, ~$200 new.)
Engine just serviced - runs great. Comes with chains and custom boxes (2) I built to hold engine and sawmill attachment and accessories. 36" bar and sawmill attachment allows 29" wide cut through logs. Otherwise if you don't want sawmill attachment, engine is not modified so it works as purchased.
Price is FIRM minimum. If multiple offers, buyers allowed to "bid" higher. STIHL 088 (~1998) + 36" bar + Alaskan Sawmill - $450 (Oakton, Va)
Date: 2012-09-08, 4:56PM EDT
Reply to this post 6x6qr-3259136490@sale.craigslist.org [Errors when replying to ads?]
This is a STIHL 088 chainsaw (8.9 HP!, cost $1200 new), runs great. I used it for milling logs into boards (not professional load, but heavy usage when used) using an Alaskan Sawmill (an attachment that clamps on the bar, ~$200 new.)
Engine just serviced - runs great. Comes with chains and custom boxes (2) I built to hold engine and sawmill attachment and accessories. 36" bar and sawmill attachment allows 29" wide cut through logs. Otherwise if you don't want sawmill attachment, engine is not modified so it works as purchased.
Price is FIRM minimum. If multiple offers, buyers allowed to "bid" higher.
Well here's a pic in my kitchen.
121.6 CC of beauty and power. Purrs like a 7.3L diesel without the exhaust pipes.
Last edited by newbury; 09-10-2012 at 10:00 AM. Reason: spelling
My rides - '95 Kubota M4700 w/ PEC, LA1001 FEL :'07 B7610, LA352 FEL, Bush Hog SBX 48 box blade, '09 Woods BH70-X w/ 16" bucket and thumb, 3pt pallet forks, Dale Phillips PHD, Jinma 8" chipper, 2 Piranha's, Winco 12KW PTO generator, Howse plow, 5' KK tiller, 5' Big Bee cutter, with a 2002 7.3L Ford F350 CC DRW 4x4 and '07 18' Hudson HSE Deluxe trailer - 5 Ton to haul it all
My saws - 12" B&D 40 volt,JD CS 62, efco 3500, Stihls - 021, 660 w/woods mod, 660 w/ DP muffler, 088, Woodmizer LT10
-
09-10-2012, 10:19 AM #2
- Join Date
- Dec 2011
- Posts
- 6,650
- Location
- Virginia USA
- Tractor
- Kubota L3200 Deere X380 Kubota RTV-X
Re: I could'nt believe it - 088 for $450
Wow, nice score. That is one heck of a saw.
-
09-11-2012, 04:09 PM #3
Re: I could'nt believe it - 088 for $450
Now what are you going to do with that
VERY nice score.".........there is only one way to find out."
"Ok, hold my beer and watch this.........."
MX5100 DIY Remotes
MX5100 Diverter install
Front Snow Plow Install
Ford 5500 Backhoe
Kubota MX5100HST w/LA844
2005 Dodge 3500 4x4 Diesel
8N Rebuilt and restored
Bushhog 306
3 Homemade wood hauling trailers
Dolmar 6400 84cc ported
Sachs-Dolmar 120SI Ported
(4) Sachs-Dolmar 116SI Ported
Dolmar PS540
Sachs-Dolmar 115i
Sachs-Dolmar 117
Sachs-Dolmar 112
-
09-11-2012, 05:06 PM #4
- Join Date
- Nov 2002
- Posts
- 1,278
- Location
- West Sunbury ,Pa.
- Tractor
- L3130 hst
Re: I could'nt believe it - 088 for $450
That is a beauty ! Congratulations !
044* , ms460* 346XP* , 372XP* ,390XP* , 395XP** ,562XP 550xp,American CLS 25hh log splitter .
(* Tlandrum work saws ) ( ** Mastermind work saws )
-
09-11-2012, 07:58 PM #5
- Join Date
- Nov 2011
- Posts
- 198
- Location
- West Tx.
- Tractor
- Kubota B2620
Re: I could'nt believe it - 088 for $450
I'll give you $460 for it
-
09-11-2012, 07:59 PM #6
Re: I could'nt believe it - 088 for $450
$470 here
".........there is only one way to find out."
"Ok, hold my beer and watch this.........."
MX5100 DIY Remotes
MX5100 Diverter install
Front Snow Plow Install
Ford 5500 Backhoe
Kubota MX5100HST w/LA844
2005 Dodge 3500 4x4 Diesel
8N Rebuilt and restored
Bushhog 306
3 Homemade wood hauling trailers
Dolmar 6400 84cc ported
Sachs-Dolmar 120SI Ported
(4) Sachs-Dolmar 116SI Ported
Dolmar PS540
Sachs-Dolmar 115i
Sachs-Dolmar 117
Sachs-Dolmar 112
-
09-11-2012, 08:02 PM #7
Re: I could'nt believe it - 088 for $450
I thought dad's 056 was a hoss.....
Dancing Goat Farm
Southern Indiana
Mahindra 3215, 111 FEL, 3710 BH
JD X300 Lawnmower (I refuse to call it a "tractor")
Ford 600/800 mix-n-match
IHC A-160
-
09-12-2012, 09:15 PM #8
- Join Date
- Jan 2009
- Posts
- 9,135
- Location
- From Vt, in Va, retiring to MS
- Tractor
- Kubota's - B7610, M4700
Re: I could'nt believe it - 088 for $450
It is a piece that builds my puzzle. However it is a piece I never expected to find for such a low price.
I've about 30 acres of hardwoods in Northern Vermont and I'm pretty sure I've got some big trees there.
I planned on being able to CSM up to 6' or so, but I was going to use my dual 660's, now I'm looking at a single powerhead
Of course the 6' bar looks like it will cost at least $0.56 more than what I paid for the sawhttp://www.cannonbar.com/images/clie...20COMPLETE.pdf
My rides - '95 Kubota M4700 w/ PEC, LA1001 FEL :'07 B7610, LA352 FEL, Bush Hog SBX 48 box blade, '09 Woods BH70-X w/ 16" bucket and thumb, 3pt pallet forks, Dale Phillips PHD, Jinma 8" chipper, 2 Piranha's, Winco 12KW PTO generator, Howse plow, 5' KK tiller, 5' Big Bee cutter, with a 2002 7.3L Ford F350 CC DRW 4x4 and '07 18' Hudson HSE Deluxe trailer - 5 Ton to haul it all
My saws - 12" B&D 40 volt,JD CS 62, efco 3500, Stihls - 021, 660 w/woods mod, 660 w/ DP muffler, 088, Woodmizer LT10
-
09-16-2012, 11:27 AM #9
- Join Date
- Jul 2006
- Posts
- 5,574
- Location
- Los Angeles / SW Washington
- Tractor
- PowerTrac 1850, Kubota RTV x900
Re: I could'nt believe it - 088 for $450
I bought my 044 for that price. What a deal! so how hard is it to start? I mean pull tension. The 044 compression just kills me.
Power-Trac 1850, grapple, hoe, 90" mower, 72" box blade
Similar Threads
-
ct 450
By dirtmonkey in forum Bobcat TractorsReplies: 32Last Post: 01-03-2012, 03:42 PM -
Sickle Bar NH 450
By deputydog in forum AttachmentsReplies: 0Last Post: 07-11-2011, 08:56 PM -
Got my 450!
By thetreed1 in forum Bobcat TractorsReplies: 11Last Post: 06-29-2010, 10:08 PM -
Made the Plunge and Could'nt Be Happier
By dmmvem in forum Kubota Owning/OperatingReplies: 11Last Post: 08-11-2006, 10:48 AM -
Could'nt start the BX again today!
By r0GuE in forum Kubota Owning/OperatingReplies: 53Last Post: 01-26-2004, 10:26 PM