TractorGuy1
New member
- Joined
- Nov 7, 2005
- Messages
- 17
- Tractor
- Jinma 224, Ford 1200, Ferguson TO35, Ford 8N, Case 646
I have a Jinma 224 with 90 hrs and have experienced the following:
First off I like the tractor over all with the exception of the following quirks
1. Leaking hoses and valve on the ZL20 loader and boy are those metric fittings expensive once you can find them. It is almost chepaer to find a used 2 spool controller with joystick and use common fittings.
2. Blown fuses. I am so tired of replacing the 30 amp fuse. I have gone over the wiring so many times but have never found the culprit. I even changed the ignition switch to the ford style with no luck.
3. Starter issues. The starter continues to engage only when it wants to. I have taken it to a starter shop and they bench tested it and everything checked out OK. But have not changed out the selenoid. I t seems to be worse in colder weather.
The two parts I was wanting to test out were the Injectors and glow plugs. What is the correct method of determining if any are faulty as I have been experiencing harder starting lately and suspect one or both of these.
Any help is apprecited on how to test these two parts.
First off I like the tractor over all with the exception of the following quirks
1. Leaking hoses and valve on the ZL20 loader and boy are those metric fittings expensive once you can find them. It is almost chepaer to find a used 2 spool controller with joystick and use common fittings.
2. Blown fuses. I am so tired of replacing the 30 amp fuse. I have gone over the wiring so many times but have never found the culprit. I even changed the ignition switch to the ford style with no luck.
3. Starter issues. The starter continues to engage only when it wants to. I have taken it to a starter shop and they bench tested it and everything checked out OK. But have not changed out the selenoid. I t seems to be worse in colder weather.
The two parts I was wanting to test out were the Injectors and glow plugs. What is the correct method of determining if any are faulty as I have been experiencing harder starting lately and suspect one or both of these.
Any help is apprecited on how to test these two parts.