Page 3 of 6 FirstFirst 123456 LastLast
Results 21 to 30 of 51
  1. #21
    Veteran Member Bob Rooks's Avatar
    Join Date
    Feb 2007
    Posts
    2,234
    Location
    Bothell & Silverdale, WA
    Tractor
    Yuchai Bulldozer

    Default Re: nortrac dozer need help with a repair

    I believe the starter is the same for all TY395 Jiang Dong engines and possibly others as well. I know Jinma uses the TY395 engine in several of their tractors, just not sure which ones.
    Yuchai YCT dozer, Mustang 2040 skid steer, Mitsubishi MS035 Mini-Ex, Trimble equipped 7' Dual Dozer, and a LiTW BH7600 back hoe for sale.

  2. #22
    Elite Member
    Join Date
    Apr 2009
    Posts
    3,202
    Location
    adirondacks

    Default Re: nortrac dozer need help with a repair

    Got the starter off in between rain showers yesterday, it was pluged with clay slop I did start taking it apart and checked the soleniod, the solenoid seems to be okay. The inside {motor} of the starter seemed fine also. Where the gears are was packed with muck, must of happened while I was pulling it out.

  3. #23
    Veteran Member Bob Rooks's Avatar
    Join Date
    Feb 2007
    Posts
    2,234
    Location
    Bothell & Silverdale, WA
    Tractor
    Yuchai Bulldozer

    Default Re: nortrac dozer need help with a repair

    Quote Originally Posted by 20 20 View Post
    Got the starter off in between rain showers yesterday, it was pluged with clay slop I did start taking it apart and checked the soleniod, the solenoid seems to be okay. The inside {motor} of the starter seemed fine also. Where the gears are was packed with muck, must of happened while I was pulling it out.
    I believe you found the problem. Dried clay, aka concrete.
    Yuchai YCT dozer, Mustang 2040 skid steer, Mitsubishi MS035 Mini-Ex, Trimble equipped 7' Dual Dozer, and a LiTW BH7600 back hoe for sale.

  4. #24
    Elite Member
    Join Date
    Apr 2009
    Posts
    3,202
    Location
    adirondacks

    Default Re: nortrac dozer need help with a repair

    Yep it was caked in there good, I got it all purty and back together fired right up. I still can't finish putting the rear end together, with all the rain, where it sites is like a giant mud sponge. They say it is suppose to be sunny today, but I can't tell with all the rain clouds blocking it

  5. #25
    Veteran Member Bob Rooks's Avatar
    Join Date
    Feb 2007
    Posts
    2,234
    Location
    Bothell & Silverdale, WA
    Tractor
    Yuchai Bulldozer

    Default Re: nortrac dozer need help with a repair

    Well, here's hoping you have a nice sunny and warm day.
    Yuchai YCT dozer, Mustang 2040 skid steer, Mitsubishi MS035 Mini-Ex, Trimble equipped 7' Dual Dozer, and a LiTW BH7600 back hoe for sale.

  6. #26
    Elite Member
    Join Date
    Apr 2009
    Posts
    3,202
    Location
    adirondacks

    Default Re: nortrac dozer need help with a repair

    All back together and running like a bear, moved a bunch fo clay, outside and inside the pond. Also moved a stump I'll have to take a picture of it, it is bigger then the dozer.

  7. #27
    Elite Member
    Join Date
    Jul 2005
    Posts
    3,966
    Location
    Raleigh, NC Hillsville, VA
    Tractor
    L2800.

    Default Re: nortrac dozer need help with a repair

    Glad to hear it up and running again...

  8. #28
    Platinum Member
    Join Date
    Nov 2008
    Posts
    802
    Location
    US Virgin Islands
    Tractor
    Jinma JM304

    Default Re: nortrac dozer need help with a repair

    Gotta be just you in particular because they have always shipped *my* ground orders immediately. I wonder what you did wrong.

    Rich

  9. #29
    Veteran Member Bob Rooks's Avatar
    Join Date
    Feb 2007
    Posts
    2,234
    Location
    Bothell & Silverdale, WA
    Tractor
    Yuchai Bulldozer

    Default Re: nortrac dozer need help with a repair

    Quote Originally Posted by 20 20 View Post
    All back together and running like a bear, moved a bunch fo clay, outside and inside the pond. Also moved a stump I'll have to take a picture of it, it is bigger then the dozer.
    That's extremely good news.
    Yuchai YCT dozer, Mustang 2040 skid steer, Mitsubishi MS035 Mini-Ex, Trimble equipped 7' Dual Dozer, and a LiTW BH7600 back hoe for sale.

  10. #30
    Elite Member
    Join Date
    Apr 2009
    Posts
    3,202
    Location
    adirondacks

    Default Re: nortrac dozer need help with a repair

    I don't know who had the bigger smile, me or the wife, she likes to run it, makes her feel tough

Page 3 of 6 FirstFirst 123456 LastLast

Similar Threads

  1. dozer track came off sprocket
    By Greg_Thomas in forum Parts/Repairs
    Replies: 23
    Last Post: 07-13-2014, 06:09 PM
  2. Nortrac Dozer
    By mitchash in forum Construction Equipment
    Replies: 5
    Last Post: 01-07-2007, 12:16 AM
  3. Nortrac Dozer
    By drzmatt in forum Chinese Tractors
    Replies: 17
    Last Post: 09-11-2006, 02:37 AM
  4. How To Buy A DOZER
    By hunterridgefarm in forum Construction Equipment
    Replies: 31
    Last Post: 03-13-2006, 05:37 PM
  5. JD750 dozer, blade tilts left and dozer stops
    By johndeere2210 in forum Construction Equipment
    Replies: 1
    Last Post: 03-01-2005, 10:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.