Dewayne Lisher
New member
- Joined
- Nov 29, 2010
- Messages
- 2
- Tractor
- Shenniu 254
Two weeks ago I asked if anyone knew of a parts source for
my Shenniu 254, and Greg G. gave me some leads. Hardy Diesel
in California had the parts on the shelf. I bought the tractor [non running]
for $800, the main thing wrong the rocker arm assembly had came loose
and one pushrod pushed off to the side not allowing the intake valve to
open up. Put the pushrod back in place-adjusted valves-changed fluids
and runs fine. Its Chinese but for $800 4-wheel drive-hardly used Koyker 150
loader, tires and paint at 90% I have got a nice tractor thanks Greg G
my Shenniu 254, and Greg G. gave me some leads. Hardy Diesel
in California had the parts on the shelf. I bought the tractor [non running]
for $800, the main thing wrong the rocker arm assembly had came loose
and one pushrod pushed off to the side not allowing the intake valve to
open up. Put the pushrod back in place-adjusted valves-changed fluids
and runs fine. Its Chinese but for $800 4-wheel drive-hardly used Koyker 150
loader, tires and paint at 90% I have got a nice tractor thanks Greg G