I have having an issue with my FEL. It only seems to work when you turn the steering all the way one way or the other. I took the valve body for the loader apart and cleaned it as well as the valve that is between the steering and the loader. Found nothing Any suggestions ?
Do you have a valve between the pump and the loader valve?
Do you have the hoses to the priority valve connected correctly.
If so, it is probably a priority valve, and uses a fixed amount of hyd GPM's for steering, and the rest of the pump flow for the loader, remotes and 3pt.
Far instance, say the pump puts out about 8 GPM's. The steering would get a fixed 3 GPM.
The other 5 GPM would be available for the rest of the hydraulic functions.
The GPM's output of the pump is dictated by the engine rpm, so the engine has to be above a certain rpm to have flow above the priority flow.
If you run the engine at med to high rpm, you should have enough flow.
If you install a 3000 psi hyd gage in the loader circuit, you can monitor and trouble the hyd system.
.