Results 1 to 10 of 10
  1. #1
    Gold Member
    Join Date
    Mar 2003
    Posts
    299
    Location
    Central Massachusetts
    Tractor
    Jinma 224

    Default Looking for Chinese filter cross reference

    There used to be a dealer site with a full chinese filter cross reference, but it seems to have gone away. Does anybody have this list? If you can provide it, I'll put it up on the tractor section of my website.

    Personally, I need the oil, fuel, air, and hydro filters for a JM224 with a Y380 motor.

    Thanks In Advance,

    DIYGuy (MarkS)

  2. #2
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    47,612
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Looking for Chinese filter cross reference

    On my yanmar 1700, someone had changed out the fuel filter bown assembly, and I couldn't use the oem fuel filter.. and in fact.. didn't know -what- fuel element fit it. had to do it the hard way. grabbed my caliper and mic, and mice'd it out.. then sat up at napa for 30 minutes, and asked for a 'pile of small fuel filter element'.. then sat int he corner with the mic and ruler and measured untill I found a few close ones.. then narrowed it down to the perfect match.

    I'm sure you could do the same with the other filters.. etc.

    Find a height, o-ring sealing diameter, and thread count/spacing for the nipple.. etc.

    ( Does nortrac list it on thier site ( nothern tools? )

    Soundguy

  3. #3

    Default Re: Looking for Chinese filter cross reference

    johns tractor

  4. #4
    Veteran Member bluechip's Avatar
    Join Date
    Jun 2003
    Posts
    1,840
    Location
    Arkansas, USA

    Default Re: Looking for Chinese filter cross reference

    Mark,
    Napa numbers
    Air filter 2276
    Fuel 3195
    Oil 1381 however there have been some posts that this being a automotive filter, may have to low of a bypass for the diesel application, so there may be a better cross for the oil filter but I don't know it. This one has been used for a couple of years and is probably still better than the OEM filter although we stock those too.

    The 380 and 385 use the same filters.

  5. #5
    Gold Member
    Join Date
    Mar 2003
    Posts
    299
    Location
    Central Massachusetts
    Tractor
    Jinma 224

    Default Re: Looking for Chinese filter cross reference

    John's site links to Maverick tractor that has gone away.

    I got a reference sent to me. So I should be all set. Off to NAPA.

    DIYGuy (MarkS)

  6. #6

    Default Re: Looking for Chinese filter cross reference


  7. #7
    Gold Member
    Join Date
    Oct 2000
    Posts
    482
    Location
    Connecticut

    Default Re: Looking for Chinese filter cross reference

    The newest 224 3 cyl is now taking Fram 3600

  8. #8
    Super Member greg_g's Avatar
    Join Date
    Dec 2003
    Posts
    6,028
    Location
    Western Kentucky
    Tractor
    JD3720 Cab, 300X loader with 4-in-1 bucket

    Default Re: Looking for Chinese filter cross reference

    I agree that the NAPA1381 is an automotive (gasoline engine) oil filter. Somebody who's supposed to know these things told me the 1381 flow rate was for automotive (gasoline) engines, and that the diesel equivalent oil filter for Y380/Y385 engines is reported to be NAPA51626

    //greg//

  9. #9
    Gold Member
    Join Date
    Mar 2003
    Posts
    299
    Location
    Central Massachusetts
    Tractor
    Jinma 224

    Default Re: Looking for Chinese filter cross reference

    I received the info from the defunct dealer site. The filter for my particular unit, a Y380, is a NAPA1626.

    It works just fine and maintains proper oil pressure level.

    DIYGuy (MarkS)

  10. #10
    Super Member greg_g's Avatar
    Join Date
    Dec 2003
    Posts
    6,028
    Location
    Western Kentucky
    Tractor
    JD3720 Cab, 300X loader with 4-in-1 bucket

    Default Re: Looking for Chinese filter cross reference

    Fat-fingered my post, was supposed to be a WIX 51626 oil filter, which can be crossed to
    Fram PH-3985,
    NAPA FIL1626 or
    NAPA SFI21626.

    Haven't personally verified air/fuel/hydro yet, so take the following with a grain of salt.

    Air
    Purolator A42019
    WIX 42276
    NAPA FIL2276

    Fuel
    Fram P6503
    NAPA 3195
    WIX 33195
    Baldwin BF790

    Hydraulic - no North American equivalent found to date. Still looking though.

    Hopefully this short list will give you enough info to cross-reference further if necessary

    //greg//

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.