Results 1 to 8 of 8
  1. #1
    New Member
    Join Date
    Aug 2014
    Posts
    5
    Location
    Hondo, TX
    Tractor
    Farm pro 2425

    Default PTO Speed selector-Farm Pro 2425

    Hoping for advice for my tractor. The PTO speed selector handle broke and I had to remove the base (attached with a roll pin) to weld the two pieces together. When I tried to install the base back onto the piece of metal that sticks out of the tractor body it slid inside. What do I have to disassemble to put things back together? Farm Pro Tractor 2425 (2005 Model).

    Thanks in advance

    Robert

  2. #2
    Elite Member RonMar's Avatar
    Join Date
    May 2005
    Posts
    2,754
    Location
    Port Angeles WA
    Tractor
    Jinma 284 delivered 06/28/05

    Default Re: PTO Speed selector-Farm Pro 2425

    Good diagrams on Johns Jinma Website, like this one.

    http://www.johnsjinma.com/files/DriveGear3.jpg

    I am guessing that you are going to have to remove the 3PH lift box/hydraulic reservoir to get to the PTO shift fork actuator(#94 in the pic?)... You will note it has a spring on it... Did that rod go all the way in? Could you get a magnetic pickup on the end and possibly pull it back out? If not, looks like you will have to remove the lift box to get at it fron the top...

    Good luck
    Ron

  3. #3
    New Member
    Join Date
    Aug 2014
    Posts
    5
    Location
    Hondo, TX
    Tractor
    Farm pro 2425

    Default Re: PTO Speed selector-Farm Pro 2425

    Tried the magnet. It went in all the way. I hoping to avoid the lift box removal. Thanks for your help.

  4. #4
    Advertiser
    Platinum Member

    Join Date
    Mar 2004
    Posts
    1,323
    Location
    Texas

    Default Re: PTO Speed selector-Farm Pro 2425

    You are going to have to take the lift box off now to get it back out and the new roll pin put in it, not a real big job but the lift box is heavy, if you are not sure of the welded selector now would be a good time to replace it


    Tommy
    Affordable Tractor Sales
    "Your Jinma Parts Superstore"
    Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

  5. #5
    New Member
    Join Date
    Aug 2014
    Posts
    5
    Location
    Hondo, TX
    Tractor
    Farm pro 2425

    Default Re: PTO Speed selector-Farm Pro 2425

    Tommy,

    Is it the PTO release fork weldment? Part# 300.37.021

  6. #6
    Advertiser
    Platinum Member

    Join Date
    Mar 2004
    Posts
    1,323
    Location
    Texas

    Default Re: PTO Speed selector-Farm Pro 2425

    No that part fits the 354 tractor , your tractor is a 254.I do not have a parts book at home, you can call the shop 979-865-4002 they can help you. Do you have a parts book ?? We have them also if you need one

    Tommy
    Affordable Tractor Sales
    "Your Jinma Parts Superstore"
    Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company

  7. #7
    New Member
    Join Date
    Aug 2014
    Posts
    5
    Location
    Hondo, TX
    Tractor
    Farm pro 2425

    Default Re: PTO Speed selector-Farm Pro 2425

    I will call. Thank you!

  8. #8
    New Member
    Join Date
    Aug 2014
    Posts
    5
    Location
    Hondo, TX
    Tractor
    Farm pro 2425

    Default Re: PTO Speed selector-Farm Pro 2425

    Everything is in place but now I have a hydraulic leak at the banjo fitting to the return line. I'm not sure about the size of the crush washers. I'm thinking it's 18MM.

Similar Threads

  1. Farm Pro 2425
    By savage12755a in forum Chinese Tractors
    Replies: 8
    Last Post: 10-20-2009, 07:55 AM
  2. farm pro 2425 help please
    By ymurf in forum Owning/Operating
    Replies: 4
    Last Post: 03-22-2008, 05:36 PM
  3. Farm pro 2425 PTO speed?
    By legbreaker in forum Chinese Tractors
    Replies: 16
    Last Post: 03-12-2005, 06:54 PM
  4. farm pro 2425
    By jbdillon in forum Buying/Pricing/Comparisons
    Replies: 3
    Last Post: 10-27-2004, 10:55 PM
  5. FARM PRO 2425 HELP!!!!!
    By Travis_R in forum Chinese Tractors
    Replies: 24
    Last Post: 06-18-2004, 09:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.