Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2005
    Posts
    47
    Location
    Pacific Northwest
    Tractor
    Jinma 354

    Default installing tines on Jinma Rototiller

    My Jinma rototiller came with tines not attached. There are two types of tines and no instructions or manual. Can anyone send / post a picture of how they are to install? Or if shown in manual, scan & post that?
    Thanks
    Bill

  2. #2
    Member
    Join Date
    Jun 2005
    Posts
    47
    Location
    Pacific Northwest
    Tractor
    Jinma 354

    Default installing tines on Jinma Rototiller

    My Jinma rototiller came with tines not attached. There are two types of tines and no instructions or manual. Can anyone send / post a picture of how they are to install? Or if shown in manual, scan & post that?
    Thanks
    Bill

  3. #3
    Elite Member SPIKER's Avatar
    Join Date
    Jun 2002
    Posts
    4,219
    Location
    Ohio, Jeromesville, Ashland County
    Tractor
    Jinma 284

    Default Re: installing tines on Jinma Rototiller

    there are L and straight tines, the L tines are also bent backwards some so that one part hits first, when tilling the ELBO point hits the dirt firts pulling the tip/end of the tine into the ground if you install so the tip/end hits the ground first it will break them pretty quickly.

    straight ones I don't think matter. mine has bent tines.

    mark M

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.