Results 1 to 3 of 3
  1. #1

    Default Cub Cadet 1872 hydro problem

    Will a hyrostat out of a 682 work in a 1872? If not what other cub trans will work without modifications? The guy who has the cub said that the hydro quit pulling. What are some things that can be replaced on the trans to try and fix the existing trans. Thanks for any help.

  2. #2
    New Member
    Join Date
    Aug 2010
    Posts
    11
    Tractor
    Cub Cadet 2145

    Default Re: Cub Cadet 1872 hydro problem

    For the existing trans maybe change fluid and filter? I like to get it warm before I drain too.

  3. #3
    Veteran Member Carl_NH's Avatar
    Join Date
    Apr 2002
    Posts
    2,056
    Location
    Coastal NH
    Tractor
    01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8

    Default Re: Cub Cadet 1872 hydro problem

    V62,

    Yes the 682-782-1800-2000 series from 85-92 era should all work - Cub used the same hydros in them. If you do a search on line you can find this out.. THe earlier verisons than the 1800 series might have a cast rear end which is preferred. Also if your 1872 doesnt have the hitch plate (hitch is attached to the AL rear end) I strongly suggest the rear hitch plate that connects to the frame rather than the rear transaxle.

    As far as getting a hydro working assume this is your 1872, so as suggested, clean Hytran fluid, Cub filter (some 3rd party filters will block flow) so its cheap insurance using a OEM.

    The other things are the relief valves on top of the hydro usually they leak first but if stuck can cause issues.

    You really dont provide enough info to reallly help your situation.. Please clarify what you are really trying to attain!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.