shamilton5151
New member
hey out there in cub land i picked up a 109 that had been sitting for years and with fresh gas and a battery it fired up been using it to plow snow for last few months. i decided on a day it got over 40 th power wash the dirty old girl and after that nothing, changed out coil condenser and cleaned the points am getting no spark. no power to the points, the points were dirty/ corroded and i am getting power to the coil just nothing at the points. do you think i got the mag wet and its rusty or is there any thing else i should check before tearing into that? thanks my next move will be checking the mag. looking for other suggestions. thanks all
Scott
Scott