Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    New Member
    Join Date
    Jun 2009
    Posts
    18
    Location
    Parker, CO
    Tractor
    Cub Cadet 7360ss

    Default 7360SS Auxiliary controller for an front auger

    I'd like to buy a skidsteer type front auger to go on the front of my tractor. They don't come with auxiliary control units. Any thoughts on what can be done or am I missing something?

  2. #2
    Gold Member gtrippleb's Avatar
    Join Date
    Aug 2009
    Posts
    429
    Location
    Central NC
    Tractor
    NH T2320 TL

    Default Re: 7360SS Auxiliary controller for an front auger

    Quote Originally Posted by jomobco View Post
    I'd like to buy a skidsteer type front auger to go on the front of my tractor. They don't come with auxiliary control units. Any thoughts on what can be done or am I missing something?
    Is this what you're looking for?
    Parts and Diagrams for Cub Cadet 603 Auxiliary Hydraulic Valve

    There's two part breakdowns which includes what looks like a kit for an Auxiliary Hydraulic Valve.
    Woods PHD35, Very Old 60" BB, Harbor Freight QH, BX42s Chipper, County Line Carry-All, County Line (Tarter Gate) 48" Tiller, Homemade 60" Dethatcher

  3. #3
    New Member
    Join Date
    Jun 2009
    Posts
    18
    Location
    Parker, CO
    Tractor
    Cub Cadet 7360ss

    Default Re: 7360SS Auxiliary controller for an front auger

    It looks like it might be. This looks like it would control the direction of the auger with the lever (or a grapple, etc). Any idea where this mounts? I've also got the back hoe on this so it appears I would also need to order the T's and then run the power beyond port to the backhoe.

    Does anybody here have a back hoe and this auxiliary controller that they could post a picture of?

    Thanks!

  4. #4
    Gold Member gtrippleb's Avatar
    Join Date
    Aug 2009
    Posts
    429
    Location
    Central NC
    Tractor
    NH T2320 TL

    Default Re: 7360SS Auxiliary controller for an front auger

    Last edited by gtrippleb; 10-26-2012 at 10:32 PM.
    Woods PHD35, Very Old 60" BB, Harbor Freight QH, BX42s Chipper, County Line Carry-All, County Line (Tarter Gate) 48" Tiller, Homemade 60" Dethatcher

  5. #5
    New Member
    Join Date
    Jun 2009
    Posts
    18
    Location
    Parker, CO
    Tractor
    Cub Cadet 7360ss

    Default Re: 7360SS Auxiliary controller for an front auger

    Thanks. I've had the operators manual. Any idea why the parts manual stops before you reach the hydraulic section? Is there a place to get a complete manual?

  6. #6
    Gold Member gtrippleb's Avatar
    Join Date
    Aug 2009
    Posts
    429
    Location
    Central NC
    Tractor
    NH T2320 TL

    Default Re: 7360SS Auxiliary controller for an front auger

    It looks like page 78/79 is where the hydraulic stuff starts.
    Last edited by gtrippleb; 11-01-2012 at 02:37 AM.
    Woods PHD35, Very Old 60" BB, Harbor Freight QH, BX42s Chipper, County Line Carry-All, County Line (Tarter Gate) 48" Tiller, Homemade 60" Dethatcher

  7. #7
    New Member
    Join Date
    Jun 2009
    Posts
    18
    Location
    Parker, CO
    Tractor
    Cub Cadet 7360ss

    Default Re: 7360SS Auxiliary controller for an front auger

    OK now I'm really confused. The 603 Auxiliary hydraulic valve I believe is what I already have on my tractor to control the loader and bucket. 2 of the lines run to the backhoe when attached. The backhoe has it's own controls built onto the unit. I just scored an auger from an auction and I could hook it up where the backhoe's 2 hoses would go to power it however I'm still lacking a forward/neutral(stop)/reverse switch.

    I'm thinking I've got to fabricate something by running 2 short lines from where the back hoe plugged in to the auxiliary valve to a control then then connect that to the auger. I basically need another block I would guess since my joystick currently controls the up/down of the bucket arms (up and down on the joystick) and the up/down of the bucket (left and right on the joystick)??? Help!

  8. #8
    Gold Member gtrippleb's Avatar
    Join Date
    Aug 2009
    Posts
    429
    Location
    Central NC
    Tractor
    NH T2320 TL

    Default Re: 7360SS Auxiliary controller for an front auger

    I'm not familiar with the auger your talking about but it sounds like you could hook a valve up that's connected to the auger which would essentially be the whole backhoe setup. Essentially swapping out the backhoe configuration for the auger.

    This parts breakdown might give you some more informaiton.
    OEM Parts
    Woods PHD35, Very Old 60" BB, Harbor Freight QH, BX42s Chipper, County Line Carry-All, County Line (Tarter Gate) 48" Tiller, Homemade 60" Dethatcher

  9. #9
    New Member
    Join Date
    Jun 2009
    Posts
    18
    Location
    Parker, CO
    Tractor
    Cub Cadet 7360ss

    Default Re: 7360SS Auxiliary controller for an front auger

    I would definitely use the inlet/outlet that run to the backhoe for flow to the new valve. This new valve would need a forward flow/neutral/reverse flow valve to control the auger for clockwise/stopped/counterclockwise motion. I'd run the auger lines to this new valve and run the backhoe lines to this new valve. Does that make sense? And would it work?

    It would be an extra control like a grapple control for my bucket I think...

  10. #10
    New Member
    Join Date
    Jun 2009
    Posts
    18
    Location
    Parker, CO
    Tractor
    Cub Cadet 7360ss

    Default Re: 7360SS Auxiliary controller for an front auger

    I went to the JD dealer to talk about this. My current hydraulic set-up to run my loader is not apparently the auxiliary hydraulic set-up due to the fact that the 603 valve is only a 2 way system according to him and the loader takes a 4 way to run the arms and bucket.

Page 1 of 2 12 LastLast

Similar Threads

  1. 7360SS Soft Cab
    By pairodocs in forum Cub Cadet Tractors
    Replies: 0
    Last Post: 09-02-2012, 11:55 AM
  2. BX25 front auger
    By sunnyboy in forum Attachments
    Replies: 15
    Last Post: 09-18-2011, 08:33 PM
  3. Are auger-to-auger bit fitments universal?
    By beppington in forum Attachments
    Replies: 24
    Last Post: 07-25-2011, 05:20 PM
  4. 7360SS
    By Mark7360 in forum Cub Cadet Tractors
    Replies: 7
    Last Post: 06-25-2010, 07:37 PM
  5. Auxiliary front hydraulics on L Series
    By dannyk in forum Kubota Buying/Pricing
    Replies: 5
    Last Post: 04-20-2006, 04:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.