Hi I've got a 2450 I've cleaned out creeks built a road and cut banks back now l am going to run about 500 ft of water line in a strait line and the ground is level can I use the trans bypass and pull or push the tractor while digging without doing any damage to trans any advice would be appreciated this is my first hydrostatic drive tractor. Thanks.
digging trench
- Thread starter jnoe
- Start date
msb1766
Platinum Member
Do you have the manual for your 2450?
I have the same tractor so I looked at my manual and is says:
"Do not operate the Hydro Static Transmission pressure release lever while the engine is running"
So I would say no.
I have the same tractor so I looked at my manual and is says:
"Do not operate the Hydro Static Transmission pressure release lever while the engine is running"
So I would say no.
kevin37b
Veteran Member
Ihave often wondered how you pushed around a hydro witha backhoe . I would get a stick long enough to hit the go pedal .