Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    New Member
    Join Date
    Aug 2014
    Posts
    6
    Location
    East Moline Ill
    Tractor
    cub cadet 7305

    Default mid deck for 7305

    I am lost and this my be the wrong place to ask/ but I am looking to buy a mid mount 72 in deck for a cub cadet 7305. Help
    Thanks

  2. #2
    Veteran Member scoutcub's Avatar
    Join Date
    Aug 2008
    Posts
    2,322
    Location
    Ohio
    Tractor
    Yanmar LX4900//Cub 7532//Cub Yanmar SC2400//Komatsu D38//Cub Volunteer//Cub SZ60/CAT 289C/CAT 308

    Default Re: mid deck for 7305

    Welcome to TBN!

    Although not the classified, this is a good start to inquire about your 7305. Which, by the way is a great tractor....I used to have one and loved it. (until it was stolen)
    As for the decks, they are few and far between, I don't think they made very many of them perhaps just not a big demand for this sized tractor. There is a 60" deck for sale on Ebay that will fit the 7305, but you need to find a mounting kit, and if your tractor doesn't have the mid PTO kit you will need that as well....I've also seen them for sale on Ebay in the past. I've seen a few 72" decks here and there, you'll just have to start calling Cub dealers all around you.
    It'd definitely be much cheaper getting a rear 72" 3 point finish mower unless you absolutely need/want the mid-mount....

    Good luck!

  3. #3
    New Member
    Join Date
    Aug 2014
    Posts
    6
    Location
    East Moline Ill
    Tractor
    cub cadet 7305

    Default Re: mid deck for 7305

    Tanks
    I wasn't sure they even made a 72 in deck. I do have the midmount PTO. Dose anyone no if you could take a pull behind and have it fabricated for a mid mount? Or are the shaft speed differences not going to work?

  4. #4
    Veteran Member scoutcub's Avatar
    Join Date
    Aug 2008
    Posts
    2,322
    Location
    Ohio
    Tractor
    Yanmar LX4900//Cub 7532//Cub Yanmar SC2400//Komatsu D38//Cub Volunteer//Cub SZ60/CAT 289C/CAT 308

    Default Re: mid deck for 7305

    I BELIEVE most mid mount PTO's are 2000 RPM, while rear PTO's are 540.....

    don't think I would try it.

  5. #5
    New Member
    Join Date
    Aug 2014
    Posts
    6
    Location
    East Moline Ill
    Tractor
    cub cadet 7305

    Default Re: mid deck for 7305

    Good news and bad. Thanks for help I fond a woods Mid mount mower deck for my 7305. but the bad news is It has none of the equipment to hang it to the tractor or the PTO shaft or the cylinder . Help.
    Should I be putting this in the classified or here?
    Thanks.

  6. #6
    New Member
    Join Date
    May 2014
    Posts
    9
    Location
    Wisconsin
    Tractor
    782

    Default Re: mid deck for 7305

    It sounds like you found yourself a 404 deck, nice unit. I just priced out some pieces for a customer that has the same deck. The good news is that parts are still available for that deck. The bad news is that the gearbox, cylinder and the major components of the front and rear subframe will cost over $2000. There does not seem to be many of those decks out there, but hopefully you will get lucky and find some used parts.

  7. #7
    Veteran Member scoutcub's Avatar
    Join Date
    Aug 2008
    Posts
    2,322
    Location
    Ohio
    Tractor
    Yanmar LX4900//Cub 7532//Cub Yanmar SC2400//Komatsu D38//Cub Volunteer//Cub SZ60/CAT 289C/CAT 308

    Default Re: mid deck for 7305

    Did you grab that 60" off of Ebay?

  8. #8
    New Member
    Join Date
    Aug 2014
    Posts
    6
    Location
    East Moline Ill
    Tractor
    cub cadet 7305

    Default Re: mid deck for 7305

    Quote Originally Posted by scoutcub View Post
    Did you grab that 60" off of Ebay?
    No I got it at a farm auction still in crate but it is 72". But so far it looks like I have big problems finding the cylinder and parts needed to raise and lower.
    I don't want to spend a punch more on a setup.

  9. #9
    Veteran Member scoutcub's Avatar
    Join Date
    Aug 2008
    Posts
    2,322
    Location
    Ohio
    Tractor
    Yanmar LX4900//Cub 7532//Cub Yanmar SC2400//Komatsu D38//Cub Volunteer//Cub SZ60/CAT 289C/CAT 308

    Default Re: mid deck for 7305

    Quote Originally Posted by mercer82 View Post
    No I got it at a farm auction still in crate but it is 72". But so far it looks like I have big problems finding the cylinder and parts needed to raise and lower.
    I don't want to spend a punch more on a setup.
    That might be tricky.....I've got a few sources for you to try. I apologize for not having #'s with me, currently overseas.
    1. small engine warehouse in Indiana
    2. Best power equipment in vermont - talk to Dave
    3. Springfield tractor in New York.....if they are still in business. talk to Iver.
    4. a place in MI......Joe's equipment, or engine warehouse, or something like that...lots of cub parts.
    5. Gene's truck sales - coleman, MI talk to Greg.

    Good luck!

    Frank

  10. #10
    New Member
    Join Date
    Aug 2014
    Posts
    6
    Location
    East Moline Ill
    Tractor
    cub cadet 7305

    Default Re: mid deck for 7305

    I tried all the numbers I could find. Springfield tractor must be out of business. no phone. Couldn't find Best Power and the rest tried but had no help. One told me they thought they could get the parts from Woods. who made the deck for Cub, but it would be about $3000. So I need to find a used one. Thanks for the help
    Dick

Page 1 of 2 12 LastLast

Similar Threads

  1. Mowing Mulching kit for JD mid deck
    By Gregs JD1023 in forum John Deere Owning/Operating
    Replies: 1
    Last Post: 07-03-2012, 09:14 AM
  2. mid mount deck
    By joez in forum Bobcat Tractors
    Replies: 3
    Last Post: 04-23-2010, 08:50 AM
  3. Mowing Is a Mid-Deck Mower Right for my Application?
    By Don_Curley in forum Kubota Owning/Operating
    Replies: 8
    Last Post: 05-29-2007, 11:32 AM
  4. Mowing BX Mid-Mount Mower Deck
    By moweraxle in forum Kubota Owning/Operating
    Replies: 13
    Last Post: 10-11-2006, 02:01 PM
  5. Mowing 72" Mid Mower Deck Pins
    By RBrown in forum Kubota Owning/Operating
    Replies: 1
    Last Post: 10-19-2000, 01:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.