Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Silver Member
    Join Date
    Jan 2005
    Posts
    128
    Location
    Austin, TX
    Tractor
    Many LS tractors & a few Yanmars too

    Default Re: SC2400 Stalling / Won't re-start

    This certainly sounds like a vaccuum lock, and gtrippleb's experience supports that theory. I've seen crud in the lines, clogged filter, clogged breather, or collapsed rubber fuel line all cause a similar situation.
    John Ryan
    RCO Tractor
    john@rcotractor.com

  2. #12
    Gold Member gtrippleb's Avatar
    Join Date
    Aug 2009
    Posts
    375
    Location
    Central NC
    Tractor
    CCY Sc2400 TL NH T2320 TL

    Default Re: SC2400 Stalling / Won't re-start

    Quote Originally Posted by ProdaddyTX View Post
    This certainly sounds like a vaccuum lock, and gtrippleb's experience supports that theory. I've seen crud in the lines, clogged filter, clogged breather, or collapsed rubber fuel line all cause a similar situation.
    There was crud in my fuel filter and since I unplugged the line from the tank and replaced the fuel filter, I haven't had any problems. My wife spent a few hours chipping limbs this past weekend and raking up leaves with the dethatcher I had my father in-law build for me. We've put 12 hours on the tractor since I changed the fuel filter and unplugged the fuel tank with no issues. So I would say my issue has been resolved.

    Greg
    CCY Sc2400, Woods PHD35, Very Old 60" BB, Harbor Freight QH, EF115 Flail Mower, BX42s Chipper, County Line Carry-All, County Line (Tarter Gate) 48" Tiller, Homemade 60" Dethatcher

Page 2 of 2 FirstFirst 12

Similar Threads

  1. SC2400
    By Sproctor in forum Yanmar (New)
    Replies: 8
    Last Post: 10-18-2011, 06:23 AM
  2. L3400 stalling problem 15 minutes after start
    By Rick Cabell in forum Kubota Owning/Operating
    Replies: 17
    Last Post: 07-18-2009, 11:00 AM
  3. sc2400 won't start. . .
    By beardley in forum Yanmar (New)
    Replies: 21
    Last Post: 02-24-2009, 04:41 AM
  4. New Sc2400
    By GeaugaDeere in forum Yanmar (New)
    Replies: 20
    Last Post: 03-22-2008, 07:04 PM
  5. 4400 won't start/turnovr after stalling - HELP!!!
    By jstoppok in forum John Deere Owning/Operating
    Replies: 10
    Last Post: 09-08-2003, 10:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.