Bucket Teeth

[schmism]

Not exactly a "yet another toothbar thread"

as mine are weld on

I could have sworn i started a thread last winter when i picked up my weld on teeth, but i cant for the life of me find it..

So a quick recap.

IN trying to track down teeth locally i came across these weld on versions at my local bobcat place



"tacked" on with a buddies 110V welder



That was last winter.... Shortly after i got all of them "tacked" on i lost one when doing some FEL work.... I have used my FEL with them "welded" like with no teeth on the shanks sence that time (8 months?)

The plan was to drill holes in the shanks for roll pins..... that didnt go so well.... so This past weekend i finnally got around to putting some teeth on (that ive had on the shelf the entire time). I ended up heated up the corners and beat them over into the divits of the tooth-roots with a ball peen hamer.

This is the result



and from the bottom youll notice it has a smooth flat profile

http://www.snjschmidt.com/pics/prope...%20(Large).JPG

(ill eventually get around to replaceing the root i lost so i dont have a hillbilly bucket teeth smile)

[3RRL]

I could have sworn i started a thread last winter when i picked up my weld on teeth, but i cant for the life of me find it..
You can click on your user name and on the left of the page that comes up is a place you can select "find all threads started by shmism",

How long have you been using the teeth like that? Have you tried to pry and trees or big rocks out with them yet? What/how have you been using it, and what advantages, if any, have you noticed from adding the teeth?
Any luck on finding that one you lost?

[john_bud]

Originally Posted by schmism

Not exactly a "yet another toothbar thread"

as mine are weld on

I could have sworn i started a thread last winter when i picked up my weld on teeth, but i cant for the life of me find it..

So a quick recap.

IN trying to track down teeth locally i came across these weld on versions at my local bobcat place



"tacked" on with a buddies 110V welder



That was last winter.... Shortly after i got all of them "tacked" on i lost one when doing some FEL work.... I have used my FEL with them "welded" like with no teeth on the shanks sence that time (8 months?)

The plan was to drill holes in the shanks for roll pins..... that didnt go so well.... so This past weekend i finnally got around to putting some teeth on (that ive had on the shelf the entire time). I ended up heated up the corners and beat them over into the divits of the tooth-roots with a ball peen hamer.

This is the result



and from the bottom youll notice it has a smooth flat profile

http://www.snjschmidt.com/pics/prope...%20(Large).JPG

(ill eventually get around to replaceing the root i lost so i dont have a hillbilly bucket teeth smile)

Schmism,

Now don't take this the wrong way, but...

I expect that you will be losing the rest of the teeth with use as the weld is not up to snuff. It looks like some are cracking already, or is it just the picture? It looks like you didn't heat the shank and cutting edge up prior to welding. Both should be up to about 400 F. It takes a bit with a O/Ac torch and rose bud tip. Then you probably need to use a stick welder with fresh 7018 rod or a 220v mig 0.35 wire minimum at a pretty high ampage. 120 - 140 or so. If you only have access to a 110v mig, you need to pre-heat higher.


Here's some pictures of what the bucket may look like with the shank broke off. Note, this bucket had wrap around shanks that are much better at taking stress than the ones you have. Yours MUST be welded on with full penetration as the weld is the only thing holding it on with the impact stresses.












I can tell you for a fact that repairing an edge tear out is not a lot of fun.


By the way, with the tooth / shank combo you have, they ball peen hammer technique you used is the correct way. Just have a few extra teeth on hand as they do come off with use once and again.

[schmism]

Originally Posted by 3RRL

You can click on your user name and on the left of the page that comes up is a place you can select "find all threads started by shmism",

How long have you been using the teeth like that? Have you tried to pry and trees or big rocks out with them yet? What/how have you been using it, and what advantages, if any, have you noticed from adding the teeth?
Any luck on finding that one you lost?

i looked through all my old threads i started and couldnt find one that was it.

big rocks - dont have any of those in IL farm country
big trees - well i learned that the limit of my little TC was about 6-8" and yes before i mounted the teeths i was fairly agressive with it, (no less agressive than i ever have been in the past)

just added the teeth this weekend, just piddlein around the shop and decided i had put it off long enough. (i had put off putting them on till i got the shanks welded on better but oh well)

Coendicentily im shocked i havnt lost more. The weld job i did was/is intended to be temp only but im in a holding pattern on buying the big welder till the house sells and its a PITA to drag the bucket to a buddy that has one.

John; I saw your backhoe rebuild, you have to remember i cant generate nearly the force on the teeth as you big boys.... My loader is 01 vintage 2000psi version not the newer 2500psi version that nets you another 500-800lbs lift capacity, not to mention the old bucket curl style that cant generate the break out force the new ones can. (oh and go back and delete the pics out of the quote section of your post for all the poor peeps on dial up)

I did take the opportunity to dig up the hard packed gravel area right in front of one of my barn doors to scrape the grass clumps and cut down the high spot. I was able to cut down and dig out 3" of packed gravel driveway. And thats as hard as ground as i get around these parts.

As for finding the old tooth... i have a large-lost-metal-object gnome. I searched the area i was working the day i lost it with a metal detector and didnt turn up despite a solid 2 hrs search. When i was tearing out a bunch of stuff last fall, i had a piece 5' of chain with slip hook i had made for yanking saplings and T-posts... it got dropped on the ground after i yanked a post and never was found again....

if i start popping them off left and right (which wouldnt surprise me) ill just accelerate my time frame for getting them welded on the right way.

[john_bud]

Okey-dokey, no problem.

Sounds like you have a handle on it. Since you read that long boring thread, you know my emotional state goes bonkers when I see poor welds. Either my mom was scared by a bad weld when she was carrying me, or I had to fix far to many of them and the damage they caused!

Have you tried fine wine on the CFO to get that welder? "Aww honey, all the guys on TBN have welders-- why can't I have a welder too?"

Oh, to find lost metal stuff in the yard, I just sharpen the mower blades. Can't go 15 ft without smacking some previously lost metal object and trashing the sharp edge. If that fails, just buy a replacement. You're sure to find it right after you bring home the new part.

jb

[3RRL]

I bought a metal detector to find my lost metal tools and stuff.

John Bud wrote:
Oh, to find lost metal stuff in the yard, I just sharpen the mower blades. Can't go 15 ft without smacking some previously lost metal object and trashing the sharp edge. If that fails, just buy a replacement. You're sure to find it right after you bring home the new part.

But that is the sure fire way to find them. It works like ... 100% everytime.

I wasn't going to say anything about those welds, being I'm sensitive to your post. LOL ... But I knew John would. That's why I asked what kind of work you subjected the teeth to so far. You might as well weld them on better before you lose more teeth....lol...my braces had heavier welds than those.

[schmism]

to be honest durring the summer the tractor's main job is an oversized lawn mower. So ive had the FEL taken off and sitting idle for the past 2 weeks, and only put it on last weekend to move some suff...(then promptly took it back off again).

(15 gal bliz fuel can is HEAVY when its full of fuel)

[Dougster]

I'd think hard about going with those wrap around shanks as someone above mentioned. I don't think those top surface only jobs would last a minute with the nasty rocks and boulders that I routinely hit.

I'm also reinforcing my similarly light-duty bucket's cutting edge (doubling the thickness!) before I do anything more with that particular bucket... i.e., add a toothbar or direct welded teeth. The flexing of a light-duty bucket & thin cutting edge can't be helping here.

Dougster

[Iowachild]

Schmism,

Is this the thread you are looking for?


http://www.tractorbynet.com/forums/c...ket-teeth.html

[schmism]

not exactly, i had taken a lot of pics when i first welded my roots on and i could have sworn i posted them in a thread.... but i guess not