carrying wood with 200cx ?????

meb9796 · 04-14-2008, 09:14 PM

I'm putting in 600' of fence in June and I'm looking for a way to carry the poles and boards with my FEL. I'm thinking some of those modified pallet jacks that clamp to your FEL but can't find any. I know most people make their own (my welding class is coming up next month!!

) but was wondering if there was any place I could look at them for an idear.

thanks!!

fireguy1451 · 04-14-2008, 10:39 PM

harbor freight and northern tool come to mind real fast but check with local dealer he may have em.

mrkool · 04-14-2008, 11:21 PM

It was Nov. 07 when I picked up a set at the local metal scrap yard for $150,
they must have 100 pairs or more, I had a hard time deciding which pair I wanted, I knew I was going to be picking up a lot of pallets, so I knew I want them to be close to 48".

I also picked up a piece of 4x4 angle about 60" long to strap to my bucket
to hang the forks on temporally .

Here's a small assortment of what they had to offer.

whiteh2o · 04-15-2008, 09:10 AM

I made my own, but, you can buy them on e-bay. Just go and buy some cheap HF binders. They have a 3K lift capacity.

Loader Forks Bucket Skidsteer Tractor Pallet Fork - eBay (item 250235452584 end time Apr-17-08 07:44:01 PDT)

newt92 · 04-15-2008, 01:39 PM

Meb9796, I bought used forks and to Deere for the loader mounts then had a welding shop make these. Also mounts to the 3pt.

excelagator · 04-19-2008, 10:22 PM

New,
Do you or anyone know the part #s for the JD quick parts for the FEL??

kennyd · 04-19-2008, 11:00 PM

Quote:

Originally Posted by excelagator

New,
Do you or anyone know the part #s for the JD quick parts for the FEL??

W43359 HOOK
W47211 PIN

RWolf · 04-28-2008, 04:17 PM

I've been moving some 12ft pallets around the property (oak, used for sheet metal). What I did is put one in lengthwise into the bucket, curled and lifted to catch the upper lip (512 loader) until off the ground. Loaded the rest and moved them to where I needed them. Not as eligant but it worked.

ChuckinNH · 04-28-2008, 05:17 PM

Here is one source for ideas

http://www.paynesforks.com/

04-14-2008, 09:14 PM	#1 (permalink)
meb9796 Member Join Date: Jan 2008 Location: Purcellville, VA Posts: 37	carrying wood with 200cx ????? I'm putting in 600' of fence in June and I'm looking for a way to carry the poles and boards with my FEL. I'm thinking some of those modified pallet jacks that clamp to your FEL but can't find any. I know most people make their own (my welding class is coming up next month!! ) but was wondering if there was any place I could look at them for an idear. thanks!! __________________ Guess who gets to build a pole barn just for the tractor and attachments????? JD2305 200cx FEL 54" MMM 54" Front blade Mackissics TP112 chipper/shredder Leinbach 7200JR PHD with 12" auger John Deere LX4 4' Rotary mower

04-14-2008, 10:39 PM	#2 (permalink)
fireguy1451 Bronze Member Join Date: Jun 2006 Location: NH Posts: 51	Re: carrying wood with 200cx ????? harbor freight and northern tool come to mind real fast but check with local dealer he may have em.

04-14-2008, 11:21 PM	#3 (permalink)
mrkool New Member Join Date: Jun 2006 Location: Middle Tenn. Posts: 23	Re: carrying wood with 200cx ????? It was Nov. 07 when I picked up a set at the local metal scrap yard for $150, they must have 100 pairs or more, I had a hard time deciding which pair I wanted, I knew I was going to be picking up a lot of pallets, so I knew I want them to be close to 48". I also picked up a piece of 4x4 angle about 60" long to strap to my bucket to hang the forks on temporally . Here's a small assortment of what they had to offer. Attached Thumbnails

04-15-2008, 09:10 AM	#4 (permalink)
whiteh2o Silver Member Join Date: Jan 2008 Location: Boise Idaho Posts: 106	Re: carrying wood with 200cx ????? I made my own, but, you can buy them on e-bay. Just go and buy some cheap HF binders. They have a 3K lift capacity. Loader Forks Bucket Skidsteer Tractor Pallet Fork - eBay (item 250235452584 end time Apr-17-08 07:44:01 PDT)

04-15-2008, 01:39 PM	#5 (permalink)
newt92 Silver Member Join Date: Dec 2007 Location: Secor Illinois Posts: 166	Re: carrying wood with 200cx ????? Meb9796, I bought used forks and to Deere for the loader mounts then had a welding shop make these. Also mounts to the 3pt. __________________ 2006 JD 2520 w/200cx loader, Harbor Freight quick hitch, homemade pallet forks, 5' KK tiller, 5' KKxb disc, 4' landpride pulverizer, 6' Karm King finish mower, Frontier RB1072 blade, homemade 5 1/2' lawn roller at 3500lbs, 2007 and 2008 Exmark 66" with 25hp Kubota deisels, 2003 JD gator TS w/power dump, 1990 Simplicity Sunstar

04-19-2008, 10:22 PM	#6 (permalink)
excelagator Silver Member Join Date: Sep 2006 Location: Extreme Northern Wisconsin Posts: 187	Re: carrying wood with 200cx ????? New, Do you or anyone know the part #s for the JD quick parts for the FEL?? __________________ Dan.. a Florida Native living in the Northwoods "My tractors do not make up for my lack of manhood, but rather make up for my lack of childhood" -JD 2210, 200CX FEL, 52" MMM, and some addtions -78 Case 446 -80ish 12 HP Workhorse

04-28-2008, 04:17 PM	#8 (permalink)
RWolf Silver Member Join Date: Apr 2008 Location: Central Texas Posts: 122	Re: carrying wood with 200cx ????? I've been moving some 12ft pallets around the property (oak, used for sheet metal). What I did is put one in lengthwise into the bucket, curled and lifted to catch the upper lip (512 loader) until off the ground. Loaded the rest and moved them to where I needed them. Not as eligant but it worked.

04-28-2008, 05:17 PM	#9 (permalink)
ChuckinNH Veteran Member Join Date: Jun 2003 Location: NH Posts: 1,365	Re: carrying wood with 200cx ????? Here is one source for ideas http://www.paynesforks.com/ __________________ B2620,Loaded R-4's , Wallenstein BX42 chipper, Bush Hog SQ148 RC, 4' x 8' chain harrow, and more to come...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode