Thumper & Buttercup
Gold Member
Hey Guys,
Finally got all the wiring and lights in, and had a couple days to do the work. I bought all my wiring and switches from a marine boating place on e-bay, good prices and good service. This place has the wiring loom like the tractor comes with and I wanted to put all the harness in them to make the install look factory.
Wiring supplier - genuinedealz
Lights supplier - thetrailershoppecom
I purchased my lights from a trailer supply place again on e-bay, pretty good service, they sent my first set of lights in a mail bag, the rings that snap on the lights got broken. I mentioned it to them and the next set they sent in a box and came OK. They still have not sent my rings but I'm not sure I'm going to use them.
My only mistake was making my upper light brackets out of thinner metal, when it warms up I'll make new ones out of 1/4" steel and all will be good. We turned off the shop lights and turned on just the flood lights, you can see they are plenty bright, sorry about the crappy photos I used my wife's camera instead of my good cannot one. I'll try to get some outside photos later when we get a good dark night. These lights are bright enough to put on for headlights for guys who don't have a good set or want to knock down the power problems. They only pull .63 amps each. Hope this helps.
Lower lights, brackets were made from L shaped deck building brackets.
Upper lights, brackets are flat steel with u-clamps and
rubber under bracket so it will not scratch paint.
Wife showing off lights.
Front and rear lights turned on in a dark shop. Sorry about the blurry photo her camera is slow and I was not steady enough.
Finally got all the wiring and lights in, and had a couple days to do the work. I bought all my wiring and switches from a marine boating place on e-bay, good prices and good service. This place has the wiring loom like the tractor comes with and I wanted to put all the harness in them to make the install look factory.
Wiring supplier - genuinedealz
Lights supplier - thetrailershoppecom
I purchased my lights from a trailer supply place again on e-bay, pretty good service, they sent my first set of lights in a mail bag, the rings that snap on the lights got broken. I mentioned it to them and the next set they sent in a box and came OK. They still have not sent my rings but I'm not sure I'm going to use them.
My only mistake was making my upper light brackets out of thinner metal, when it warms up I'll make new ones out of 1/4" steel and all will be good. We turned off the shop lights and turned on just the flood lights, you can see they are plenty bright, sorry about the crappy photos I used my wife's camera instead of my good cannot one. I'll try to get some outside photos later when we get a good dark night. These lights are bright enough to put on for headlights for guys who don't have a good set or want to knock down the power problems. They only pull .63 amps each. Hope this helps.
Lower lights, brackets were made from L shaped deck building brackets.
Upper lights, brackets are flat steel with u-clamps and
rubber under bracket so it will not scratch paint.
Wife showing off lights.
Front and rear lights turned on in a dark shop. Sorry about the blurry photo her camera is slow and I was not steady enough.