Results 1 to 2 of 2
03-16-2010, 08:20 AM #1
Hydraulic linear rotator for snowblower
This design has been tested for over 10 years with no failures. I built the frame from 2x2x1/4 angle iron and bolted the assembly in place. The pulleys are 1/4" capacity rated at 500LBS. The cylinder is a 2"x8" tierod ag grade, and the cable is 1/4". The rotation time is around 1.8 seconds for 240 degrees.
10-29-2011, 11:03 AM #2
- Join Date
- Sep 2007
- Winnipeg, Manitoba, Canada
- Montana T2334 HST
Re: Hydraulic linear rotator for snowblower
That is very interesting.
Just what i was interested in.
I sent you an email.
Backhoe JD 110 Tractor Loader BackhoeBy bushytlb in forum John Deere Owning/OperatingReplies: 23Last Post: 05-09-2011, 07:09 PM
By bcarwell in forum HydraulicsReplies: 16Last Post: 01-30-2010, 09:01 AM
By waldron in forum HydraulicsReplies: 8Last Post: 12-28-2009, 10:17 AM
By JohnBarlow in forum HydraulicsReplies: 7Last Post: 08-21-2005, 11:15 PM
By grimmt in forum John Deere Owning/OperatingReplies: 5Last Post: 10-12-2004, 04:34 PM