4 Attachment(s)
I added a Warn ATV winch to the BX
I had a Warn 2500 lb winch on the ATV and I never used it. So I added a 2" square tube and some gussets to the mounting plate and a extra mounting plate for the relay and remote switch connector. Now it is all in a small unit with the only connections needed are the 12 volt power and the remote plug. I used 120 amp connectors for the 12 volt power leads, I bought those from Granger.
Re: I added a Warn ATV winch to the BX
This looks like it was made for the tracktor Very nice
Re: I added a Warn ATV winch to the BX
Thanks Doug, the winch will fit on my little log skidding setup. on the boom pole, and on the counter weight I made for the three point. I have plans to dig out the small pond my daughter has in her back yard, I thought I could use the winch if (when) I get stuck doing that.
Re: I added a Warn ATV winch to the BX
Nice idea. Of course, next week you'll get the ATV stuck and need the winch. :D