Better battery access.

   / Better battery access. #1  

Marveltone

Veteran Member
Joined
Jun 20, 2010
Messages
1,485
Location
Somewhere north of Roseau, MN
Tractor
Fordson Major Diesel, McCormick Deering W4, Ford 1510, John Deere L111
Okay, I'm sick and tired of having to remove the FEL brace to open the hood to reach in front of the radiator to put clamps on the battery to either charge the battery or jump-start the tractor.

Solution? I purchased heavy duty quick connects, inserted a pair in my jumper cables (about 1/4 to 2/3 from one end, giving me long and short cables to work with) and using a section scavenged from my jumper cables, made a charge/jump point on the side of the tractor with a matching plug to mate with the jumper cables.

I can now charge or jump the tractor without having to touch the hood.

Joe
 

Attachments

  • 1030111655a.jpg
    1030111655a.jpg
    530.9 KB · Views: 471
  • 1030111655.jpg
    1030111655.jpg
    539.1 KB · Views: 375
  • 1030111656.jpg
    1030111656.jpg
    919.4 KB · Views: 466
   / Better battery access. #2  
They sure are great. I did the same thing a few years ago with my old forklift. Good stuff. :thumbsup:


wiring3-1.jpg


wiring4-2.jpg
 
   / Better battery access. #3  
Both of these are nice setups.
 
   / Better battery access. #4  
I've got a set as well, sticking out from the grill of my JD4300, (also a set on my pickup) Booster cables will plug into either one...or if needed I can hook the battery charger clips to them
 
   / Better battery access. #5  
How many amps will those connectors handle ?

E/S
 
   / Better battery access. #7  
It 50 amps enough to jump start a tractor ?

E/S
 
   / Better battery access. #8  
Depends on the size you buy. Some of mine are good for #2 wire (over 100amp continuous rating), others came with connectors for #10 wire (smaller size plugs). Many sets of booster cables are made of #6 wire which is normally rated for about 50-60 amps continuous use. I believe the large connectors say 400amps on them....but that would be for booster cable type use(intermittent), not lift trucks (continuous)....
I use a set on my 8000lb winch and have never had a heating problem...much the same load as a starter but for longer periods
 
   / Better battery access. #9  
Interesting.
Thanks

E/S
 
 
Top