With a Case IH 275 31 hp 4WD Compact Tractor, there is a rear mounted hydraulic valve that can be routed to the front of the tractor to support a hydraulic blade/plow. I was wondering if anyone knows of any plows or blades that can be modified or are compatible with the 275 and any tips for mounting, hydraulic vs manual tilt, and problems with the setup in general.
Case IH 275 Blade/Plow
- Thread starter Kurtrado
- Start date
DennisFolsom
Gold Member
There are some examples in Customization, and more in the Snow Removal section, of various ways guys have installed plows on the tractors. Many have hooked up the angle cylinders (I assume that's what you meant when you said "tilt") and some haven't.
I believe some have connected their rear hydraulic outlet for the angle, which seems to be what you want to do.
Almost any blade can be modified to be compatible with almost any tractor.
Good luck!
I believe some have connected their rear hydraulic outlet for the angle, which seems to be what you want to do.
Almost any blade can be modified to be compatible with almost any tractor.
Good luck!