Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,758
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default decal placement on C

    need some info on the decal placement onthe c

    when i got this one she just had the 2 C decals onthe lower front of the hood and the side hood decals.

    my set appears to be 11 pieces, so that leaves 7 more decals.. I havn't looked at all of them. I assume some will be self evident.. but will accept any guidance.

    soundguy
    Attached Thumbnails Attached Thumbnails decal placement on C-a53403-jpg  

  2. #2
    Super Member
    Join Date
    Apr 2000
    Posts
    6,420
    Location
    central New York
    Tractor
    all makes and models

    Default Re: decal placement on C

    I think they will just fall into place when you get started!

  3. #3
    Elite Member
    Join Date
    Jan 2009
    Posts
    2,876
    Location
    Carroll, Ohio
    Tractor
    IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans

    Default Re: decal placement on C

    Light switch, oil bath cup on air filter, shift pattern, uummmmm... That's all that comes to mind at the moment...

  4. #4
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,758
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: decal placement on C

    where's the shift pattern one go and the lamp switch one.

    what's LH on the lamp decal.. I know d / b is dim bright.

    i also have an o d b lamp decal..? off dim bright?

  5. #5
    Elite Member
    Join Date
    Jan 2009
    Posts
    2,876
    Location
    Carroll, Ohio
    Tractor
    IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans

    Default Re: decal placement on C

    I've seen the shift decals on the fuel tank, just up on ahead of where the tank rolls down, in the back. Should still be visible from the seat.

    L H I think is for the low-high charging.

    And yes, ODB is correct as you stated...

    Seems I had a few left over when I did my BN years ago, but it may have been a multi-tractor set. Direct from IH..., when it was still IH..!!

  6. #6
    Elite Member WilliamBos's Avatar
    Join Date
    May 2004
    Posts
    4,809
    Location
    Innisfil, Ontario, Canada
    Tractor
    MF 1635 12x12 Powershuttle

    Default

    Quote Originally Posted by Soundguy
    need some info on the decal placement onthe c

    when i got this one she just had the 2 C decals onthe lower front of the hood and the side hood decals.

    my set appears to be 11 pieces, so that leaves 7 more decals.. I havn't looked at all of them. I assume some will be self evident.. but will accept any guidance.

    soundguy
    Not sure on the decal placement, but excellent work!!
    Thanks,

    Will


    I do not care if someone's net nanny is watching!! You need to stop...

  7. #7
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,758
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: decal placement on C

    thanks guys!

  8. #8
    Elite Member
    Join Date
    Jan 2009
    Posts
    2,876
    Location
    Carroll, Ohio
    Tractor
    IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans

    Default Re: decal placement on C

    I scanned this picture from an original H owners manual. Enlarged it, so you could see where the light switch decal goes. I do believe they were all the same.

    If I remember correctly, since lights were an option, the LH may have been for the Low-High charging for the electric start.

    The L H D B is for models with optional lighting.
    Attached Thumbnails Attached Thumbnails decal placement on C-light-switch-decal-jpg  

  9. #9
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,758
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: decal placement on C

    thanks for the pic.
    Attached Thumbnails Attached Thumbnails decal placement on C-a53535-jpg  

  10. #10
    Veteran Member
    Join Date
    Nov 2005
    Posts
    1,150

    Default Re: decal placement on C

    What is your plans for that tractor? If you can find a belly mower for it, and if you brakes work good, you have a fine old zero-turn that can likely mow circles around the modern ones that they are selling today.

Page 1 of 2 12 LastLast

Similar Threads

  1. Mowing JD757 melting rear decal ?
    By DP Property in forum John Deere Owning/Operating
    Replies: 0
    Last Post: 08-20-2011, 11:36 PM
  2. BX1500 Decal
    By eric_t in forum Kubota Owning/Operating
    Replies: 1
    Last Post: 07-29-2005, 12:50 PM
  3. Farmall 100 Decal placement
    By Ramon in forum Farmall Vintage Tractors
    Replies: 5
    Last Post: 07-03-2004, 04:12 PM
  4. Blocked decal on TC33DA
    By TCowner in forum New Holland Buying/Pricing
    Replies: 1
    Last Post: 01-12-2004, 07:25 AM
  5. Satoh Beaver S370D Decal Part Numbers
    By pej2945 in forum Mitsubishi/Satoh
    Replies: 8
    Last Post: 06-17-2002, 05:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.