Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    New Member
    Join Date
    Aug 2012
    Glandorf, oh.
    farmall B

    Default Re: IH little genius plows

    I got the little genius one bottom I was after. The owner said it was ready to put in the ground as is. Any suggestions before I hook it up to my B and give it a try. It's a one 16" on steel wheels. needs paint but looks like its all there. The plow sheer and land slide are in good shape

    Thanks for the help.

  2. #12
    Elite Member
    Join Date
    Sep 2010

    Default Re: IH little genius plows

    Congratulations. Check all bolts to be sure they are tight. Then you are ready to go do some plowing.

  3. #13
    Elite Member
    Join Date
    Jan 2009
    Carroll, Ohio
    IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans

    Default Re: IH little genius plows

    Do you have a swinging drawbar..?? As wide as the B's are, you'll be offset quite a bit on the hitch. You may have some sidedraft, if hooked to the regular drawbar. Just line up the insides of your right rear tire on tractor, and right wheel on plow, to both run in the furrow.

    Wheel weight, or loaded tire on the left side will probably be a must...

    Being that is a 16" bottom, after the second, or third round, you should be plowing 8" deep. Old rule of thumb is, a plow is designed to plow half as deep, as it is wide.

    And me plowing in second gear, was in crop ground, not sod... Not sure what you will be turning over, but if it is sod ground, it may need to be in first, so don't be disappointed if it won't pull it in second the first time over.

    If your not familiar with the type of soil, it may be best to go in first gear anyway, in case of rocks. And wouldn't hurt to oil up the break-away hitch, just in case..!!

    Oh yeah... Pictures...!!

Page 2 of 2 FirstFirst 12

Similar Threads

  1. A need a hydraulic genius
    By huskerhayman in forum Hydraulics
    Replies: 22
    Last Post: 07-15-2012, 06:29 AM
  2. Little Genius pull plow need help
    By kritter in forum Ag Tractors & Machinery
    Replies: 3
    Last Post: 03-22-2012, 08:38 AM
  3. Plugging in your tractor.....GENIUS!!!
    By Ezlivn in forum Owning/Operating
    Replies: 30
    Last Post: 01-22-2011, 10:12 PM
  4. The IH #8 Little Genius is here
    By flusher in forum General Vintage Tractors
    Replies: 6
    Last Post: 03-22-2008, 11:28 AM
  5. Genius of the week.....
    By Junkman in forum Safety
    Replies: 16
    Last Post: 12-11-2004, 09:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.