Results 1 to 3 of 3
  1. #1
    Platinum Member tessiers's Avatar
    Join Date
    Sep 2007
    Posts
    661
    Location
    Central Maine
    Tractor
    05' JD 790 - 49' Ford 8n - 53' Ford NAA - 70' Massey Fergusen 135 diesel - 1950 John Deere MC - 1992 Thomas T-83 skid steer

    Default Super C Fast hitch

    Just picked up a 1953 super C. Hast the fast hitch, how much will it lift, I have a 5' bushhog and a 6' rock rake I would like to use behind it, not sure if it will lift them.
    check us out at www.tessiersfarm.com

  2. #2
    Gold Member
    Join Date
    Feb 2011
    Posts
    436
    Location
    Parish NY
    Tractor
    555DTC Farmall 200

    Default Re: Super C Fast hitch

    Enough to lift the front end off the ground before you really max it out. Especially with stuff farther out from the rear. You may need weight on the front and/or wheel weights.

    This is per the manual it is dependent on wheel spacing

    750lb rear tread up to 82"
    1000lb " " up to 76" (with 2 sets of front wheel weights)
    700lb " " up to 80"
    400lb " " up to 88"

  3. #3
    New Member
    Join Date
    May 2013
    Posts
    10
    Location
    Wilmot, N.H.
    Tractor
    McCormick Deering OS4

    Default Re: Super C Fast hitch

    Well, I don't have an exact figure, but I have a total of 230lbs. extra in the front, and if you don't go gently on the clutch, it will lift off the ground! And even at that, you don't hear anything working very hard.

Similar Threads

  1. grader on fast hitch
    By VTLOWBOY in forum Attachments
    Replies: 3
    Last Post: 03-17-2013, 09:35 AM
  2. Farmall Super C Fast-Hitch & Hydraulics
    By BoonvilleKid in forum General Vintage Tractors
    Replies: 27
    Last Post: 09-04-2012, 09:24 AM
  3. Farmall fast hitch
    By Don62 in forum Build-It Yourself
    Replies: 2
    Last Post: 05-23-2012, 01:06 AM
  4. farmall super c fast-hitch hydraulic block
    By deer hunter in forum Case-IH
    Replies: 2
    Last Post: 01-02-2012, 05:32 PM
  5. Points for IH Fast Hitch
    By DougKnudson in forum Build-It Yourself
    Replies: 8
    Last Post: 08-15-2009, 12:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.