jeffgreef
Silver Member
- Joined
- Jul 20, 2009
- Messages
- 187
- Location
- Plumas County, California
- Tractor
- Farmall, Gibson, Windolph, Simar, Bear Cat, Vaughan, Howard
Manual I have is for the A model, not Super A, and has a date of 1941, whereas my Super A is a 1950. The lubrication chart in the A manual says to open the clutch access door on the left, put a grease gun on the fitting and give it 10 pumps. That's a lot of grease for one bearing.
The previous owner replaced clutch and bearing a few years ago. Said that the old bearing was not a ball or roller bearing at all, but rather a piece of bakelite. That seems weird.
Seems to me a sealed ball bearing throw out bearing shouldn't need grease to begin with.
Whazzup?
Manual I have is INT. 5462 8-14-41-4B.
The previous owner replaced clutch and bearing a few years ago. Said that the old bearing was not a ball or roller bearing at all, but rather a piece of bakelite. That seems weird.
Seems to me a sealed ball bearing throw out bearing shouldn't need grease to begin with.
Whazzup?
Manual I have is INT. 5462 8-14-41-4B.