Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Member
    Join Date
    Jul 2004
    Posts
    39
    Location
    Swansboro NC
    Tractor
    Farmtrac 60

    Default Farmtrac Filter. Farmtrac Update

    The Farmtrac Filters are expensive.

    Using Ford 3910 I found these filter numbers for the oil and hydraulic.

    WIX filters: Hydraulic 51712 Oil Filter 51775


    Has anyone used aftermarket filters on their Farmtrac 60 or 555? If so, lets develop a cross reference list (if not already done)

    By the way here is one of my periodic updates on my 2003 Farmtrac 60.

    350 hours.

    3rd left pittman steering arm (replaced retaining bolt and really cranked on it with a long bar, locktite, and brake cleaner to assure no grease in connection). Problem has been wear in the slot on the pitman where the woodruff key fits.

    Replaced rubber boot on 5320 loader joystick

    Replaced Grille

    Changed large and small airfilters

    Put new set of blades on my SQ 72 bushhog...snapped one blade off cutting brush.

    Will haul my 10-80 disc plow to my Dad's place. Recently snapped right end off plows crossbar. Broke right at the linch pin hole.

    Have neutral safety switch in box ready to install

    Need to run wire from Alt to Starter or Ignition Switch for Alt energizer. Still just touching a wire.

    Latest projects (visit index for pictures)

    Bushhogged about 2000ft through the pocosin (high thick swamp) with very thick vegetation. Use back in technique after punching a hole through my radiator grille and almost piercing my radiator quite a while back.

    Dug shallow pond 3' about 70 X 30 using my FEL, a pond scoop and my old 10-80 Dearborn disc plow. Taking advantage of the dry weather. Ran the tractor over the surface of the pond numerous times. Holding water so far.

    Built a deer stand 4wX8LX8H on my patio. Used the tractor FEL and chain on pallet forks to lift the box up and transport to the woods. Then used FEL to lift box 8' into the air. So, that legs could by inserted into the elevator brand metal connectors. Since I'm adverse to heights did it this way vice build on site. I'll have pictures on my website someday.

    Have seen lots of deer and other wildlife. However, the deer this year harvested sitting in a regular tree stand, on the ground or flushed (Son got that one, single shot H&R 20 gauge #3 buck 15 yards running)

    My favorite dealer is:

    Roger Fowler Sales & Service, Inc.
    Suffolk VA 23438
    Phone 757-986-3503
    Fax 757-986-2151

    Honest appraisals of Farmtrac line ie some models recommended some not. 60 is recommended. Good shop and great parts servce. Ask for Todd or Eric. I do business with these folks since their place is right on Hiway 13 the road I use going up to Hampton VA.
    Best Regards,
    Jim
    www.redbayfarm.com

  2. #2
    New Member
    Join Date
    Nov 2005
    Posts
    23
    Location
    olivebridge ny,thats near kingston ny
    Tractor
    FARMTRAC 360 TDC

    Default Re: Farmtrac Filter. Farmtrac Update

    HI GUY
    you wouldent have the number for a 360 dtc farmtrac hydralic filter would you?
    thanks PAPY

  3. #3
    Member
    Join Date
    Jul 2004
    Posts
    39
    Location
    Swansboro NC
    Tractor
    Farmtrac 60

    Default Re: Farmtrac Filter. Farmtrac Update

    Sorry Papy, Don't have that info. Not familiar with that model tractor.
    Best Regards,
    Jim
    www.redbayfarm.com

  4. #4
    Bronze Member
    Join Date
    Jan 2007
    Posts
    52
    Location
    South of Suffolk, Va.
    Tractor
    Farmtrac 360DTC

    Default Re: Farmtrac Filter. Farmtrac Update

    Jim,
    I agree with you that Roger Fowler's is a very good dealership. I got my 360 there in Oct '06 and have no complaints about the tractor. I said in another post that I believe dealer prep makes a world of difference in the problems you have, I haven't had any.

    We moved here in '04 and got a Ford 3000 with the place, I had never owned a tractor and wasn't too sure what to do or how to do it, without killing myself. I had seen the tractors on 13 and went to visit to ask lots of dumb questions. Todd answered them and told me to call when I had more. When it came time to replace the Ford, I went to the dealer that I trusted.

    When it's time for a new truck, I'll go see Roger on the other side of the road.

    Mark

  5. #5
    Member
    Join Date
    Jul 2004
    Posts
    39
    Location
    Swansboro NC
    Tractor
    Farmtrac 60

    Default Re: Farmtrac Filter. Farmtrac Update

    Mark,
    Good to hear. Real nice folks who take care of customers. Roger Fowler's is a good place to buy a tractor or a truck. Nice to see a successful family owned operation.

    Jim
    Best Regards,
    Jim
    www.redbayfarm.com

  6. #6
    Member
    Join Date
    Jan 2008
    Posts
    40
    Location
    Clayton,In

    Default Re: Farmtrac Filter. Farmtrac Update

    most use a 1536 napa on hyd some of the last units used 1715

  7. #7
    Member
    Join Date
    Jan 2008
    Posts
    40
    Location
    Clayton,In

    Default Re: Farmtrac Filter. Farmtrac Update

    Quote Originally Posted by agequipt
    most use a 1536 napa on hyd some of the last units used 1715
    These are for the 360dtc

  8. #8
    Member
    Join Date
    Jul 2004
    Posts
    39
    Location
    Swansboro NC
    Tractor
    Farmtrac 60

    Default Re: Farmtrac Filter. Farmtrac Update

    Quote Originally Posted by agequipt
    most use a 1536 napa on hyd some of the last units used 1715
    Thanks! I put a 1715 hydraulic filter on my tractor yesterday.
    Best Regards,
    Jim
    www.redbayfarm.com

  9. #9
    Veteran Member
    Approved Advertiser
    wallace's Avatar
    Join Date
    Feb 2004
    Posts
    2,949
    Location
    PA.
    Tractor
    MAHINDRA

    Default Re: Farmtrac Filter. Farmtrac Update

    If your farmtrac has a Daedong engine we as Kioti dealers can help.
    Wallace Tractor and Equipment
    www.wallacetractorandequipment.com
    rwallacetractor@echoes.net
    RICK WALLACE

    (570) 689-7494


    We're not just a tractor store anymore!

  10. #10

    Default Re: Farmtrac Filter. Farmtrac Update

    I have a Montana 3840, which I hear matches a Farmtrac dtc360. Does anybody know the numbers for a hydraulic filter?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.