Results 1 to 4 of 4
  1. #1
    Platinum Member Qapla's Avatar
    Join Date
    Sep 2008
    Posts
    681
    Location
    Gator Country
    Tractor
    New Holland TC40D HST 4WD FEL/BH

    Default Farmtrac 360 DTC Clutch

    Our 360 has the Backhoe/Front Loader attachments. This is our primary use for the tractor. It has been working quite fine until Yesterday.

    It was used the day before and was evidently working normal (my brother was using it). Then I went to use it the next morning. There were problems:

    The clutch pedal seems to have no real resistance now (almost like stepping on a wet sponge)
    The tractor has no "get-up-and-go" in the upper range.
    The mid and lower range seem to still work as before, however the clutch still has no real resistance at the pedal as before.

    Any ideas?

  2. #2
    Platinum Member Qapla's Avatar
    Join Date
    Sep 2008
    Posts
    681
    Location
    Gator Country
    Tractor
    New Holland TC40D HST 4WD FEL/BH

    Default Re: Farmtrac 360 DTC Clutch

    I forgot to ask ...

    Does anyone know where I can get a service/repair manual for this tractor?

  3. #3
    Platinum Member
    Join Date
    Jan 2002
    Posts
    856
    Location
    South West Pa/Greene county
    Tractor
    Long/Landtrac360DTC

    Default Re: Farmtrac 360 DTC Clutch

    Sounds like the return spring on the clutch pedal broke. If you look under the floor plate on the side with the clutch pedal, you should see a place on the pedal as well as on the frame/plate where the spring attaches.
    Ed King

    Purple Tractor Man

  4. #4
    Platinum Member Qapla's Avatar
    Join Date
    Sep 2008
    Posts
    681
    Location
    Gator Country
    Tractor
    New Holland TC40D HST 4WD FEL/BH

    Default Re: Farmtrac 360 DTC Clutch

    Quote Originally Posted by EdKing View Post
    Sounds like the return spring on the clutch pedal broke.
    There is a spring on the pedal that is fastened to the tractor toward the back of the machine. The pedal returns to the up position just fine.

    Is this the spring you are talking about (it is still there) or should there be another one that pulls the clutch lever from the front?

    Qapla!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.