Results 1 to 2 of 2
06-22-2010, 03:25 PM #1
- Join Date
- Jun 2010
Ford Jubilee 3 point hitch problem
I just bought a ford jubilee made the mistake of not trying out 3 point hitch. If I raise it the slightest amount it automatically goes to the top of the range. Transmission fluid/hydraulic all look as if just changed. Someone told me it may have an airlock and need to be bleed. Any advice. Thanks.
06-23-2010, 01:34 AM #2
- Join Date
- Mar 2002
- Central florida
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: Ford Jubilee 3 point hitch problem
air int he hyds would not cause that.
check to make sure you are in position control, not draft control. small 3" lever straight up for position control.
past that may be out of adjustment with wear onthe cam follower pin, or the cam itself.. and some one may have didled with it to try and correct it.
Box Scraper Adjusting Three Point Hitch for new Box BladeBy kvmapr in forum AttachmentsReplies: 31Last Post: 07-26-2012, 10:29 PM
By MrChris in forum Mahindra Owning/OperatingReplies: 3Last Post: 05-08-2010, 10:52 AM
3-Point Hitch Cub Cadet 7195 - 3 point hitch stuck in up positionBy 5smokey in forum Cub Cadet Yanmar & CUTsReplies: 3Last Post: 05-01-2010, 11:02 PM
By Kaliburz in forum AttachmentsReplies: 6Last Post: 01-23-2005, 09:42 AM
By FDRanch in forum Kubota Buying/PricingReplies: 0Last Post: 06-06-2001, 01:11 PM