kool cat
Bronze Member
will this number tell me anything about my tractor
trans number
- Thread starter kool cat
- Start date
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
that's a raised casting number.
better to take a pic of the machine .. showing left side and post it along with the hand stamped number ont he left back side of the block, aft of the oil filter on a flattened 1x4 boss.
better to take a pic of the machine .. showing left side and post it along with the hand stamped number ont he left back side of the block, aft of the oil filter on a flattened 1x4 boss.
OP
kool cat
Bronze Member
the spot on the block theres nothing there it there is its gone
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
they are hand stamped super light to begin with.. many times there may only be faint traces. occasionally you get a repalcement block with no numbers..n npic fromt he side will help id it based on installed options
OP
kool cat
Bronze Member
not sure if you can see
wrong side
OP
kool cat
Bronze Member
not sure if you can see anything
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,238
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
way too close... need to see SIDE of tractor.. not engine.
in any case.. oval rad rods ( post 44 ) and a side dizzy
engine is later 8n...
since any N engine fits in any N chassis.. you have to date the machine based on engine options and chassis options..
in any case.. oval rad rods ( post 44 ) and a side dizzy
engine is later 8n...
since any N engine fits in any N chassis.. you have to date the machine based on engine options and chassis options..