Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Member kool cat's Avatar
    Join Date
    Oct 2012
    Posts
    49
    Location
    napanee,ont
    Tractor
    ford 8n

    Default loader question

    I never had anything with hydralics before just wondering how much hydralic oil should be in the holding tank.
    Its a old massey ferguson loader series 99

  2. #2
    Member kool cat's Avatar
    Join Date
    Oct 2012
    Posts
    49
    Location
    napanee,ont
    Tractor
    ford 8n

    Default Re: loader question

    i should add it is a ford 8n tractor massey loader and a external pump off the cam shaft

  3. #3
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,823
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: loader question

    off the cam shaft huh.. i bet that is some tricky engineering feed getting a pump on the camshaft.

    crank shaft mounted front stinger pumps are what the norm would be for external loader hyds on an 8n.. etc.

    the crank is the one that has the pistones attached to it. the cam is that small one that plays with lifters and valves and the dizzy..


    on a loader with a fram tank.. or a seperate tank.. if no fill level.. make sure when all SA cy;s are exhausted.. it's near full.. but not so much that it flows over when warm.

    lift all SA cyls.. and see how much she drops compaired to compressed cyls.. find the happy spot between to keep from going dry, vs overflowing.

  4. #4
    Member kool cat's Avatar
    Join Date
    Oct 2012
    Posts
    49
    Location
    napanee,ont
    Tractor
    ford 8n

    Default Re: loader question

    i sure its off the cam but could be wrong.

    thanks for the info

  5. #5
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,823
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: loader question

    if it's an N.. and it's off the cam. I'd love to see it.

    cranksahft stinger pumps are the norm.

    53+ had a hyd pump on the back right side of the engine driven off the cam...

    post a pic

  6. #6
    Member kool cat's Avatar
    Join Date
    Oct 2012
    Posts
    49
    Location
    napanee,ont
    Tractor
    ford 8n

    Default Re: loader question

    I mean i could be wrong. but its looks afull closeloader question-imag0365-jpgloader question-imag0369-jpgloader question-imag0372-jpg

  7. #7
    Member kool cat's Avatar
    Join Date
    Oct 2012
    Posts
    49
    Location
    napanee,ont
    Tractor
    ford 8n

    Default Re: loader question

    the pump sits behind the plate on the frontloader question-p1020487-jpg

  8. #8
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,823
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: loader question

    looks close? really?

  9. #9
    Member kool cat's Avatar
    Join Date
    Oct 2012
    Posts
    49
    Location
    napanee,ont
    Tractor
    ford 8n

    Default Re: loader question

    I will try to get a better pic tomorrow, more light

  10. #10
    Old Timer Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    51,823
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: loader question

    loader question-8nout-gifloader question-8nin-gif

    check these out.

    hint... the lower one with the big journals and the large round thing with teeth on the back end.

    that's the crankshaft

Page 1 of 2 12 LastLast

Similar Threads

  1. >> LOADER QUESTION ??
    By BearKiller in forum Attachments
    Replies: 5
    Last Post: 09-18-2009, 10:34 PM
  2. Loader Question
    By JordanMarina in forum Attachments
    Replies: 3
    Last Post: 05-04-2006, 06:50 PM
  3. Loader Question
    By JordanMarina in forum Kubota Owning/Operating
    Replies: 0
    Last Post: 05-04-2006, 12:27 PM
  4. Loader question
    By pruntyc in forum Yanmar
    Replies: 10
    Last Post: 09-23-2005, 09:28 PM
  5. Loader question
    By CTyler in forum Kubota Owning/Operating
    Replies: 10
    Last Post: 02-20-2003, 12:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.