Results 1 to 6 of 6
-
11-05-2012, 07:55 PM #1Gold Member
- Join Date
- Aug 2009
- Posts
- 336
- Location
- Dallas Oregon
- Tractor
- Mitsubishi MT372, Ford NAA
Part numbers for NAA Caps
Does anyone have a good Napa part number for the radiator cap and fuel tank cap for an NAA? I also have Oriely's and car quest near by but my preference is Napa. Thanks.
-
11-05-2012, 08:33 PM #2Elite Member
- Join Date
- Sep 2010
- Posts
- 3,481
- Location
- PRINCE TOWNSHIP, ONTARIO
- Tractor
- MASSEY 1020 and 1945 CASE SC, 1914 1 1/2 hp EMPIRE HIT AND MISS ENGINE
I don"t but I am Sure soundguy will know.
"If the women don't find you handsome, they should at least find you handy" - Red Green
PRINCE TOWNSHIP TRACTOR CRUISE WEBSITE
https://sites.google.com/site/prince...torcruise/home
-
11-06-2012, 08:33 AM #3Epic Contributor
- Join Date
- Mar 2002
- Posts
- 42,111
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: Part numbers for NAA Caps
the fuel cap is a weird deal. most places will list the diesel cap.. the old cap is non vented.. and there was a program to swap out for a vented cap.. but I believe it is over.
a TSC will have the diesel cap cheaper ( by far ) than the dealer...
part number D5NN9030A
you will find that many 'ear' style caps fit.
some tape the cap and trill a hole and put in a pop rivit that can jingle in it as a vent.. but not so much that fuel sloshes out.
radiator cap is, i believe a 7 psi cap part number 1T8100A2 an older 4 psi N cap will fit but not reccomended.. nor is a replacement 11-14 psi cap.
ps.. any cap gas or rad, from a 53-64 model 4 cyl will fit.. etc..
-
11-06-2012, 10:19 AM #4Gold Member
- Join Date
- Aug 2009
- Posts
- 336
- Location
- Dallas Oregon
- Tractor
- Mitsubishi MT372, Ford NAA
Re: Part numbers for NAA Caps
The fuel cap I have is non vented. It seals so tight that eventually the fuel stops flowing, so I was looking for a vented cap. I'll look for the diesel cap, or else plan to modify mine.
On the radiator i have the original one that was with the radiator. It is a 4 psi and tests good, but is kind of loose fitting. I'm very wary of radiator caps, after loosing a buick motor due to a failed cap, and (driving up to Lassen NP in over 100degree temps, with the bad cap)
Thanks SG
-
11-06-2012, 10:56 AM #5Epic Contributor
- Join Date
- Mar 2002
- Posts
- 42,111
- Location
- Central florida
- Tractor
- ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Re: Part numbers for NAA Caps
yeah.. 4 will be fine..
-
11-06-2012, 03:30 PM #6Gold Member
- Join Date
- Aug 2009
- Posts
- 336
- Location
- Dallas Oregon
- Tractor
- Mitsubishi MT372, Ford NAA
Re: Part numbers for NAA Caps
Napa Part numbers:
Rad cap (7psi) BK 703-1460
gas cap (vented) BK 703-1220 (this is shiny chrome for those who are concerned with such things)
Similar Threads
-
Part numbers for BH-90
By Timan in forum Kubota Owning/OperatingReplies: 1Last Post: 03-25-2008, 11:49 PM -
I've got the part numbers, now what?
By nhm90 in forum Mitsubishi/SatohReplies: 5Last Post: 10-14-2007, 01:53 PM -
Do NH part numbers "cross" to CaseIH part numbers?
By adlertom in forum New Holland Owning/OperatingReplies: 18Last Post: 08-09-2006, 03:34 PM -
Do NH part numbers "cross" to Case IH part numbers?
By adlertom in forum Case-IHReplies: 3Last Post: 08-02-2006, 12:44 PM -
BX Part Numbers?
By RET in forum Kubota Owning/OperatingReplies: 5Last Post: 06-24-2002, 01:45 PM


Reply With Quote
