City Farmer
Platinum Member
- Joined
- Jan 3, 2013
- Messages
- 527
- Location
- Chesterfield, Mi
- Tractor
- Ford 3000, 4400 & 4500TLB Case 830 Case 350 dozer
Hi all, I have an OEM single spool valve I'd like to move from my 4400 to my 3000 for a hyd. top link, all that will bolt right up and I'll be all set with some new lines.
These are the questions: I use a (2) spool-(2) handled valve to control the loader. I would swap it for a joystick if I can reuse that valve. Is there a way to feed the (2) spool valve from the single spool? I don't need 3 remotes but if I had them I'd consider adding a tilt with the extra valve. I only want to do this if I can make it work with what I have and still use the 3ph.
Here are some pictures of the valve
These are the questions: I use a (2) spool-(2) handled valve to control the loader. I would swap it for a joystick if I can reuse that valve. Is there a way to feed the (2) spool valve from the single spool? I don't need 3 remotes but if I had them I'd consider adding a tilt with the extra valve. I only want to do this if I can make it work with what I have and still use the 3ph.
Here are some pictures of the valve