billrigsby
Member
This is for a friend, pics can be seen here
https://www.dropbox.com/home/Ford%20Tractor
Thanks, Bill
https://www.dropbox.com/home/Ford%20Tractor
Thanks, Bill
Trying to ID a Ford Commercial Tractor
- Thread starter billrigsby
- Start date
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 11,942
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Sorry Mate, I'm not about to 'sign in' to this drop box site.
Besides that, pictures only go so far... we'll need some ID numbers/serial number or some other indication beyond it saying "Ford" on the side.
I'm/we're happy to help; just need more to go on.
You and/or your friend could have a look through TractorData.com - information on all makes and models of tractors for assistance too.
Besides that, pictures only go so far... we'll need some ID numbers/serial number or some other indication beyond it saying "Ford" on the side.
I'm/we're happy to help; just need more to go on.
You and/or your friend could have a look through TractorData.com - information on all makes and models of tractors for assistance too.
LD1
Epic Contributor
Yea, post the pictures directly here please. Just resize them til they are under 1Mb or they will fail to load, and no explanation given
OP
billrigsby
Member
Here are the pics
Thanks, Bill
Thanks, Bill
OP
billrigsby
Member
I think this is the ID we are looking for?
Lt me know if that is it, and any one can ID.
Bill
Lt me know if that is it, and any one can ID.
Bill
Kirk-NJ
Gold Member
- Joined
- Sep 20, 2009
- Messages
- 411
Like I said before trans has been switched out .1801 HD industrial
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 11,942
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
Yes it does look like an 1801 Series Industrial.
Here's the TractorData.com info: TractorData.com Ford 1841 industrial tractor information
MikesTractor
Silver Member
Based on the model number (40303 D), it could also be one of these:
1964 Ford 4 Industrial : AT-12-62-FO : Gary Alan Nelson Photography
That would make it a 4000 industrial (4030). Add the loader and backhoe and you have the same tractor as OP.
The 4000 industrial is very hard to tell from an 1801 industrial. The biggest difference is the colors and model numbers on the transmission.
Mike
1964 Ford 4 Industrial : AT-12-62-FO : Gary Alan Nelson Photography
That would make it a 4000 industrial (4030). Add the loader and backhoe and you have the same tractor as OP.
The 4000 industrial is very hard to tell from an 1801 industrial. The biggest difference is the colors and model numbers on the transmission.
Mike
Kirk-NJ
Gold Member
- Joined
- Sep 20, 2009
- Messages
- 411
Mike,
As I stated before the tranny was switched out so you can't go by those numbers. The 4030 will not have a frame and has different front axle, grill, sheet metal. The 4040 will have the frame. You can see the difference between my light industrial and my HD industrial.
Kirk
As I stated before the tranny was switched out so you can't go by those numbers. The 4030 will not have a frame and has different front axle, grill, sheet metal. The 4040 will have the frame. You can see the difference between my light industrial and my HD industrial.
Kirk
