Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    May 2011
    Posts
    27
    Location
    Olive Branch, MS
    Tractor
    Mitsubishi D1500 Ke85 engine

    Default Novice could use some help -- Gravely rotary plow

    Hello,
    My Gravely Professional 5665 has a quick hitch Round Top attachment on the front. It has a normal PTU type fitting out front along with a guide pin an retaining pin.

    The attachment works great with my 40" mower. However I am now trying to attach my rotary plow.

    The problem I am running in to is the rotary plow has a recessed gear. The gear is about a half inch recessed in the housing. It looks about identical to the rear portion of a quick hitch with a set bolt but rather than protruding from the body by an inch or two, it is recessed.

    So, there is no connectivity with my Quick Hitch Round top PTO. If I take the Quick Hitch Round Top off, there is at least an inch or two space between the Drive Shaft and the Rotary Plow fitting.

    Can anyone shed some light on what I am missing or need to do about this. I would surely appreciate any help!!

    Thanks!

    Clay

  2. #2
    Platinum Member
    Join Date
    May 2003
    Posts
    667
    Location
    NE PA
    Tractor
    AC 5020, Gravely Com12, JD M, JD X300R, WH 16 Auto

    Default Re: Novice could use some help -- Gravely rotary plow

    A few pics of what you have on both the tractor and plow would be helpful to help.

  3. #3
    Member
    Join Date
    May 2011
    Posts
    27
    Location
    Olive Branch, MS
    Tractor
    Mitsubishi D1500 Ke85 engine

    Default Re: Novice could use some help -- Gravely rotary plow

    Quote Originally Posted by js5020 View Post
    A few pics of what you have on both the tractor and plow would be helpful to help.
    I will try to get some uploaded asap. Thanks!!

  4. #4
    Member
    Join Date
    May 2011
    Posts
    27
    Location
    Olive Branch, MS
    Tractor
    Mitsubishi D1500 Ke85 engine

    Default Re: Novice could use some help -- Gravely rotary plow

    I hope the pics download and will help....-gravely-jpg
    I hope this is going to show the Quick disconnect. It is pretty much a standard PTU outlet.-rotaryplow-jpg. This picture is the picture of my rotary plow receiver. There is no compatibility between the ptu and the rotary plow. If I remove the quick hitch, the drive does not reach the teeth on the rotary plow,,

  5. #5
    Platinum Member
    Join Date
    May 2003
    Posts
    667
    Location
    NE PA
    Tractor
    AC 5020, Gravely Com12, JD M, JD X300R, WH 16 Auto

    Default Re: Novice could use some help -- Gravely rotary plow

    Looks like your missing the coupler #12 on the linked diagram.

    http://www.oldgravelys.net/pdf/Plow_...e_IPL_0587.pdf

  6. #6
    Silver Member
    Join Date
    Oct 2010
    Posts
    229
    Location
    Dallas, TX
    Tractor
    Gravely

    Default Re: Novice could use some help -- Gravely rotary plow

    Quote Originally Posted by js5020 View Post
    Looks like your missing the coupler #12 on the linked diagram.

    http://www.oldgravelys.net/pdf/Plow_...e_IPL_0587.pdf
    No, he is definitely missing the gear.

  7. #7
    Member
    Join Date
    May 2011
    Posts
    27
    Location
    Olive Branch, MS
    Tractor
    Mitsubishi D1500 Ke85 engine

    Default Re: Novice could use some help -- Gravely rotary plow

    Quote Originally Posted by RichardTX View Post
    No, he is definitely missing the gear.
    I went down and looked at my plow again. The picture doesn't show it too well because of grease, but I believe I have part number 11 on the Gravely diagram (Clutch, Dog). The teeth are about 1/2 " long. I am hoping js5020 is correct and all I need is part #12 (Dog, Attachment) which is Gravely Part #21343. Now if I can just find a Dog Attachment! Thanks to all very much for the help!!

  8. #8
    Member
    Join Date
    May 2011
    Posts
    27
    Location
    Olive Branch, MS
    Tractor
    Mitsubishi D1500 Ke85 engine

    Default Re: Novice could use some help -- Gravely rotary plow

    Quote Originally Posted by js5020 View Post
    Looks like your missing the coupler #12 on the linked diagram.

    http://www.oldgravelys.net/pdf/Plow_...e_IPL_0587.pdf
    OK, it looks like I need to figure out how to get my hands on a Dog, Attachment part #21343. Thanks very much!

  9. #9
    Veteran Member
    Join Date
    Jul 2010
    Posts
    1,309

    Default Re: Novice could use some help -- Gravely rotary plow

    I needed that same part when trying to connect my newer rototiller to my older tractors. I found it several times on ebay reasonable, only to be outbid the last few seconds. Dealer could order it but if I recall, it was over $100 (local dealer).
    2007 Kubota L3130, LA723 FEL
    Land Pride FDR1672 rear finish mower, Frontier RB1172, Koyker KB60 BH
    Pallet forks, Golf cart canopy bolted to ROPS, 9" & 12" PHD

Similar Threads

  1. what can the gravely rotary plow do?
    By twrighthere in forum Gravely & Ariens
    Replies: 18
    Last Post: 11-09-2011, 11:16 AM
  2. GRAVELY ROTARY PLOW
    By JWD1312 in forum Gravely & Ariens
    Replies: 17
    Last Post: 11-08-2010, 11:24 AM
  3. Gravely Rotary Plow - oil seal question
    By JinRI in forum 2-Wheeled Tractors
    Replies: 2
    Last Post: 03-22-2010, 03:41 PM
  4. Gravely 30" rotary mower
    By 53gravely in forum 2-Wheeled Tractors
    Replies: 5
    Last Post: 04-04-2007, 09:18 AM
  5. Novice help: planting things, plow/disk or harrow?
    By Laminarman in forum Projects
    Replies: 28
    Last Post: 05-23-2004, 08:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.